Timeline
01/15/11:
- 12:42 Changeset [10106] by
- Niculin changed something in the presentation of the data
01/14/11:
- 16:16 Changeset [10105] by
- Fixed warning if alarm server down
- 15:42 Changeset [10104] by
- FTM_test9 added: check FTM-FTU communication
- 09:19 Changeset [10103] by
- supports trigger disable & enable. enables during init.
- 07:46 Changeset [10102] by
- - still testing - AD7719 and ATmega ADC work muxers as well output via USB
01/13/11:
- 11:56 Changeset [10101] by
- Amplitude calibration information stored in file
01/11/11:
- 20:39 Changeset [10100] by
- Amplitude calibration debugged
- 14:44 Changeset [10099] by
- Corrupt events (wrong start-package flag) are removed from internal buffer
- 12:49 Changeset [10098] by
- bug in last commit fixed
- 12:40 Changeset [10097] by
- switching SCLK ON and OFF during acalib-process
- 12:06 Changeset [10096] by
- Small changes to limit error messages in case crate communication breaks
- 11:43 Changeset [10095] by
- DRS shift register init is now done by the FAD firmware --> init procedure changed
- 10:20 Changeset [10094] by
- initial commit of FSC firmware - use for FSC testing only -
01/07/11:
- 15:48 Changeset [10093] by
- Added afterpulse treatment to MAvalanchePhotoDiode and MSimAPD
01/06/11:
- 17:04 Changeset [10092] by
- Fixed a mistake in the log-output of MSimRandomPhotons.
- 17:03 Changeset [10091] by
- Updated class reference of MPointingDevCalc.
- 16:53 Changeset [10090] by
- Implemented improved handling for the obscuration by the detector.
- 16:51 Changeset [10089] by
- Added a new abstract function GetL() to MGeom.
- 13:59 Changeset [10088] by
- Added output of filename for outliers.
- 13:58 Changeset [10087] by
- 13:58 Changeset [10086] by
- 13:57 Changeset [10085] by
- 13:56 Changeset [10084] by
- 07:37 Changeset [10083] by
- BoardList configuration simplified
- 07:27 Changeset [10082] by
- Fixed bug in display of physical pipeline
01/05/11:
- 17:19 Changeset [10081] by
- DRS write shift register & write config register
- 14:12 Changeset [10080] by
- Added amplitude calibration
- 12:25 Changeset [10079] by
- Alarm window opens if Alarm/MasterAlarm increases
- 11:40 Changeset [10078] by
- possible to choose, which socket is used for data transmission. only socket 0 for every event or sockets 1..7
- 11:30 Changeset [10077] by
- choose sock0 or sock1..7 via soc command - see help
- 10:56 Changeset [10076] by
- different socket modes - untested
01/04/11:
- 17:21 Changeset [10075] by
- LED controller debugged
- 15:02 Changeset [10074] by
- added LED controller
- 10:03 Changeset [10073] by
01/03/11:
- 15:26 Changeset [10072] by
- block to block communication debugged - part 1
Note:
See TracTimeline
for information about the timeline view.
