Timeline
07/05/11:
- 11:08 Changeset [11256] by
- Updated reference about regex for database url.
- 11:05 Changeset [11255] by
- Updated regex to evaluate schedule-database.
- 10:25 Changeset [11254] by
- Changed SetConfiguration to EvalConfiguration; changed positional argument from schedule-database to new schedule; added --schedule to be able to just schedule something.
- 10:24 Changeset [11253] by
- Changed SetConfiguration to EvalConfiguration and its return value from bool to int; Main now returns with its return value if it is positive or zero.
07/04/11:
- 22:22 Changeset [11252] by
- Added a first draft of a unified main program.
- 22:21 Changeset [11251] by
- Started to unify the main program of the io_service based control program.
- 20:50 Changeset [11250] by
- Fixed a problem in the C version of GetLocalIp
- 20:23 Changeset [11249] by
- Added warning for non virtual destructors.
- 20:22 Changeset [11248] by
- Fixed a function description.
- 20:22 Changeset [11247] by
- Made destructors virtual.
- 20:07 Changeset [11246] by
- Made destructor virtual -- destructors of base classes should always be virtual.
07/02/11:
- 16:34 Changeset [11245] by
- Unified all three run modes.
07/01/11:
- 16:54 Changeset [11244] by
- 'repaired' switch in openRun and set default for fFileFormat to kNone
- 16:53 Changeset [11243] by
- Added SET_FILE_FORMAT
- 16:51 Changeset [11242] by
- Fixed switching off AutoScale in ADC window; delete fEventData in destructor
- 16:10 Changeset [11241] by
- FTM: changes in library file: firmware ID increased to v2 and CMD_CONFIG_FTU added
- 10:52 Changeset [11240] by
- Set default y-scale of Rate plot to [0,1010]
- 10:47 Changeset [11239] by
- Fixed reference clock indices.
- 10:40 Changeset [11238] by
- Changed Adc_Data from uint16 to int16
- 10:11 Changeset [11237] by
- Fixed calculation of g_maxMem
- 10:11 Changeset [11236] by
- Changed again the default address for ocal ip resolution to a default for 'public networks' 14.0.0.1
- 09:40 Changeset [11235] by
- Little layout changes
- 09:31 Changeset [11234] by
- Small layout updates
- 09:21 Changeset [11233] by
- Layouted FAD tab
- 09:15 Changeset [11232] by
- supports firmware v0206
- 08:49 Changeset [11231] by
- Display DIM_DNS_NODE.
- 08:49 Changeset [11230] by
- Updated initialization process according to the other programs.
- 08:38 Changeset [11229] by
- Reverted commit by mistake.
- 08:30 Changeset [11228] by
- Layout update FAD tab
06/30/11:
- 23:35 Changeset [11227] by
- Changed startup tab
- 23:29 Changeset [11226] by
- broadcast whole events via Dim; made MainWindow and abstract base class and implemented the Adc tab widgets into MainWindow and FactGui
- 20:55 Changeset [11225] by
- Implemented REFRENECE_CLOCK
- 20:23 Changeset [11224] by
- Send FADC data once a second.
- 20:18 Changeset [11223] by
- Fixed ADC pipeline display
- 20:17 Changeset [11222] by
- Added StartRun/StopRun
- 19:01 Changeset [11221] by
- Removed q as shortcut for --quit to avoid confusion with --quiet
- 14:16 Changeset [11220] by
- now use the toStrings method of the converter
- 14:01 Changeset [11219] by
- added 2 write error states + bug fix
06/29/11:
- 23:08 Changeset [11218] by
- Added --cmd and --quit program option.
- 22:59 Changeset [11217] by
- Made ProcessLine a public function to allow for --cmd command.
- 22:59 Changeset [11216] by
- Added cmd and quit command.
- 21:02 Changeset [11215] by
- Added NightAsInt
- 21:02 Changeset [11214] by
- Little change.
- 17:28 Changeset [11213] by
- Renamed the fad temperature led.
- 16:12 Changeset [11212] by
- v0207 features DRS reset, but needs hardware mods. Do not use
- 15:25 Changeset [11211] by
- Added ToStrings
- 15:15 Changeset [11210] by
- Moved coding and decoding of the 12 bit temperature to the conversion from and to network byte order.
- 15:14 Changeset [11209] by
- Added trigger id and fake temperature.
- 15:14 Changeset [11208] by
- Added a new constructor which takes special_values as argument.
- 15:13 Changeset [11207] by
- Many little and more changed to teh FAD and event builder controls; added DRS temperature transmission
06/28/11:
- 14:44 Changeset [11206] by
- FTM network settings for La Palma added
- 14:28 Changeset [11205] by
- Adaptions to allow compilation on Ubuntu
- 09:03 Changeset [11204] by
- Fixed DIM service for PLLLCK
06/27/11:
- 17:22 Changeset [11203] by
- Removedmore obsolete stuff.
- 17:21 Changeset [11202] by
- Removed some obsolete code.
- 17:03 Changeset [11201] by
- Inverted bit for command socket.
- 16:59 Changeset [11200] by
- Restructured the FAD gui; made widgets for run-number and ROI active.
- 15:06 Changeset [11199] by
- Removed fDimCurrentEvent; wrapped update of fDimEvents into a 1s check.
- 15:03 Changeset [11198] by
- Do noz print 'Trying to connect' message more than once.
- 15:03 Changeset [11197] by
- Changed the fStatus2 array to support also an 'all diconnected but switched on' state.
- 15:03 Changeset [11196] by
- Changed the FAD Led status to support also an 'all diconnected but switched on' state.
- 14:45 Changeset [11195] by
- Updated with some more status bit support.
- 13:27 Changeset [11194] by
- Removed an obsolete debug out.
- 13:26 Changeset [11193] by
- Replaced the constructor of EventHeader with a vector<uint16_t> by just a pointer of type uint16_t
- 13:25 Changeset [11192] by
- Made the tcp::endpoint and the slot number a member of ConenctionFAD; notify the EventBuilderWrapper about updates of e.g. the header.
- 13:24 Changeset [11191] by
- Workaroudn for a problem with negative gi_NumConnects
- 13:00 Changeset [11190] by
- Added the possbility to give an IP Address with a port rather than a name which must be resolved; send keep alive packages in 10s intervals
- 08:43 Changeset [11189] by
- Fixed bug for online display of small events (missing flush of temporary file)
06/24/11:
- 17:38 Changeset [11188] by
- Also update status informations when connection information has changed in the meantime.
- 16:59 Changeset [11187] by
- Removed some debug code.
- 16:46 Changeset [11186] by
- Tried another fix for the CompareBits
- 16:42 Changeset [11185] by
- Fixed a typo.
- 16:39 Changeset [11184] by
- Fixed displays of FadLeds
- 16:19 Changeset [11183] by
- Must be i instead of i/7 when checking for identical values.
- 16:15 Changeset [11182] by
- Updated default base port
- 16:14 Changeset [11181] by
- Added more infos to debugRead; some fixed to CompareBit
- 16:00 Changeset [11180] by
- Added check whether all ports are connected again.
- 15:46 Changeset [11179] by
- Added FAD DNA.
- 15:21 Changeset [11178] by
- FADctrl publishes PLL lock status
- 14:41 Changeset [11177] by
- Display more FAD status bits.
- 14:36 Changeset [11176] by
- Added output of frequency calculated from the clock conditioner values.
- 14:19 Changeset [11175] by
- Removed some obsolete stuff
- 14:17 Changeset [11174] by
- New scheme to transmit the status bits.
- 14:15 Changeset [11173] by
- this is v0206 --- v0205 had a bug: when sending 'enable busy' this was not even parsed in firmware. now enable/disable busy is being parsed. NEW BASE PORT = 31919 (this ist 0x7CAF :-)
- 13:52 Changeset [11172] by
- Updated maximum number for event id.
- 13:39 Changeset [11171] by
- Changed CONTINOUS_TRIGGER_ON/OFF to ENABLE_CONTINOUS_TRIGGER; added ENABLE_BUSY
- 13:38 Changeset [11170] by
- Changed CONTINOUS_TRIGGER_ON/OFF to ENABLE_CONTINOUS_TRIGGER; added ENABLE_BUSY
- 13:16 Changeset [11169] by
- Added DrsEnabled
- 12:56 Changeset [11168] by
- Removed obsolete debug output.
- 12:56 Changeset [11167] by
- Renamed led for pll lock; removed ref clock overflow.
- 12:55 Changeset [11166] by
- Added PLL lock.
- 12:29 Changeset [11165] by
- Reverse EventHeader::ftriggerId
- 12:27 Changeset [11164] by
- Switch on keep alive packates with 10s timeouts.
- 12:26 Changeset [11163] by
- Added kCmdContTrigger and EventHeader::Id()
- 12:25 Changeset [11162] by
- Added code to send changed distributions from headers.
- 12:24 Changeset [11161] by
- Changed enable continous trigger command.
- 12:23 Changeset [11160] by
- Added ENABLE_CONTINOUS_TRIGGER
- 12:23 Changeset [11159] by
- Updated display of version number; display ethernet rate in kB/s
- 12:23 Changeset [11158] by
- Updated in the FAD tab.
- 08:49 Changeset [11157] by
- Fixed output for data transmission socket.
06/23/11:
- 22:11 Changeset [11156] by
- Added new bits in Status word; removed obsolete ref clock too high; added new command enable busy.
- 21:25 Changeset [11155] by
- v0205 changed ADC dataformat to unsigned short. - untested ... not even synthesized - HDL designer doesnt find license server anymore.
- 21:04 Changeset [11154] by
- Added constructor to EventHeader.
- 21:04 Changeset [11153] by
- Piped data from debugHead to EventBuilderWrapper
- 21:03 Changeset [11152] by
- Updated ADC range.
- 19:26 Changeset [11151] by
- Removed an obsolete debug output; added missing instantiation of fDimFadFwVersions.
- 19:25 Changeset [11150] by
- Changed default.
- 19:24 Changeset [11149] by
- Removed obsolete include of iostream
- 18:59 Changeset [11148] by
- Switched to DimDescribedService::Update
- 18:56 Changeset [11147] by
- Do not write 0 byte reads to debug stream.
- 18:54 Changeset [11146] by
- Added some output for opening and closing debug files.
- 18:18 Changeset [11145] by
- Removed typo.
- 16:59 Changeset [11144] by
- Removed some debug out.
- 16:53 Changeset [11143] by
- Added reset trigger id button.
- 16:50 Changeset [11142] by
- Added button to reset trigger id.
- 16:46 Changeset [11141] by
- Moved PLL_Lock, remove obsolete buttons.
- 16:35 Changeset [11140] by
- Removed some debug output.
- 16:34 Changeset [11139] by
- Added option to set maximum event buffer memory.
- 16:34 Changeset [11138] by
- Fixed displayed memory buffer size.
- 16:16 Changeset [11137] by
- Changed maximum of some widgets.
- 15:57 Changeset [11136] by
- Send more Dim infos.
- 15:56 Changeset [11135] by
- Added two more templates for simplicifations.
- 15:54 Changeset [11134] by
- Latest Update.
- 15:54 Changeset [11133] by
- Added more FAD infos.
- 15:53 Changeset [11132] by
- Added more FAD elements.
- 13:00 Changeset [11131] by
- Put everything into the history, but only successfull commands into the file history.
- 12:59 Changeset [11130] by
- Further improved output of PLL locks.
- 10:12 Changeset [11129] by
- Updated clock conditioner settings.
- 09:38 Changeset [11128] by
- Updated clock conditioner values.
- 09:29 Changeset [11127] by
- Debugged the ADC plot with some fixes when sending the Dim data; set new values for the clock conditioner; added some preliminary checks for identities in the FAD headers
06/22/11:
- 23:30 Changeset [11126] by
- Added EventBuilder thread status to UpdateConnectionStatus
- 23:28 Changeset [11125] by
- Added slots to set socket option of FADs
- 23:27 Changeset [11124] by
- Added Dock widget to ADC tab and LED for Event Builder.
- 23:17 Changeset [11123] by
- Some little improvements to the ADC data.
- 22:36 Changeset [11122] by
- Firmware version v0202 LEDs show: busy and w5300_reset DISCON after W5300 interrupt with 2s timeout MM-reconf after w5300 interrupt single software triggers are alwazs active see details in the eLOG
- 22:18 Changeset [11121] by
- Updated from v19r21 to v19r22
- 22:17 Changeset [11120] by
- Decode PLLLCK
- 22:16 Changeset [11119] by
- Added socket option for FAD
- 20:17 Changeset [11118] by
- Added possibility to debug data transmission to the boards.
- 19:57 Changeset [11117] by
- Added FSC_CONTROL led; removed (maybe temporarily setting of maximumj in plot for rates
- 19:56 Changeset [11116] by
- Send commands only to connected boards; disable initial sending of any commands; fixed order of boards and chips in arrays
- 19:55 Changeset [11115] by
- Added DUMP_STREAM command; output number of received bytes
- 19:55 Changeset [11114] by
- Fixed some FAD controls, added FSC to list of states.
- 18:50 Changeset [11113] by
- Removed Connect Disconnect
- 17:50 Changeset [11112] by
- Added TOGGLE for singel FAD connections.
- 17:43 Changeset [11111] by
- Added more FAD control buttons; implemented button events
- 17:04 Changeset [11110] by
- Removed an obsolete debug output.
- 17:04 Changeset [11109] by
- Implemented 'def' and 'default' as replacement for the default base-addr of the camera.
- 15:48 Changeset [11108] by
- Fixed display of board and patch rate.
- 14:09 Changeset [11107] by
- Changed clock conditioner values.
- 13:52 Changeset [11106] by
- Fixed clock conditioner values in DimStaticData; they have to be 32 bits.
- 13:51 Changeset [11105] by
- Added the default values for the clock conditioner, marked with a star.
- 13:50 Changeset [11104] by
- Properly display a 32bit word.
- 13:50 Changeset [11103] by
- Fixed range of clock conditioner spin boxes.
- 13:20 Changeset [11102] by
- Added possibility to set the clock conditioner's frequency for some selected frequency.
06/21/11:
- 23:21 Changeset [11101] by
- Added an example for an extension.
- 22:37 Changeset [11100] by
- Some cosmetics to command descriptions.
- 22:34 Changeset [11099] by
- Renamed state 'offline' to 'disengaged' to avoid confusion with the offline state in the GUI.
- 22:27 Changeset [11098] by
- Allow CONNECT also when diconnected but event builder thread still running (offline)
- 22:18 Changeset [11097] by
- Added const qualifiers to factOut and factStat
- 22:18 Changeset [11096] by
- Added const qualifiers to factOut and factStat
- 21:57 Changeset [11095] by
- Return 0 as default in eventCheck; added comment to commands; fixed PRINT_EVENT; allow double CONNECT or DISCONNECT
- 21:23 Changeset [11094] by
- Don't count NumConnected down if already 0.
- 21:08 Changeset [11093] by
- Added IsDisconnected
- 21:08 Changeset [11092] by
- Added some comments about eventCheck
- 20:54 Changeset [11091] by
- Added new connection/disconnection scheme; added eventCheck stub
- 15:40 Changeset [11090] by
- Changed bahaviour of opening closing sockets
- 13:29 Changeset [11089] by
- Various dataLogger changes
- 12:52 Changeset [11088] by
- Updates to Edd. History server now periodically saves histories to disk.
- 10:34 Changeset [11087] by
- Command 'boards' accepts 'none' as argument
- 10:17 Changeset [11086] by
- Make sure that gPad is always set correctly; replaces gPad by canv where possible in slot_RootEventProcess; do only AbsPixelToX/Y; added warning output if the mapping files are not well read.
06/20/11:
- 22:43 Changeset [11085] by
- Some cleanup of DimData
- 21:37 Changeset [11084] by
- Unified size checking of DimService
- 18:41 Changeset [11083] by
- Removed the _FROM_SLOT from IGNORE_EVENTS
- 18:26 Changeset [11082] by
- Added commands DUMP_STREAM and DUMP_RECV to have better access to the behaviour of the sockets.
- 16:36 Changeset [11081] by
- Added preliminary interface for g_port.sockDef
- 16:35 Changeset [11080] by
- Added commands to set g_Port.sockDef to 0
- 16:07 Changeset [11079] by
- Added PRINT_EVENT and BLOCK_TRANSMISSION_RANGE
- 13:56 Changeset [11078] by
- Fixed command names for multiplicities.
06/19/11:
- 14:12 Changeset [11077] by
- Fixed bug in active board selection for data writing
- 13:14 Changeset [11076] by
- Updated FTM to FSC
- 10:07 Changeset [11075] by
- Renamed dataLogger to datalogger.
- 10:05 Changeset [11074] by
- Replaced dataLogger with datalogger.
- 10:04 Changeset [11073] by
06/18/11:
- 23:24 Changeset [11072] by
- Updated.
- 23:15 Changeset [11071] by
- Replaced v19r21 by a version extracted with 'unzip -a' to get proper unix text format.
- 23:10 Changeset [11070] by
- Updated from v19r20 to v19r21
- 23:07 Changeset [11069] by
- Renamed dim_v19r20 to just dim, this makes maintenance easier.
- 22:59 Changeset [11068] by
- 18:24 Changeset [11067] by
- Added some interpretation of the received data.
- 18:23 Changeset [11066] by
- Added initialization fAdcDataCanv
- 18:21 Changeset [11065] by
- Added the ADC tab and change some names to mor emeaningful ones.
- 18:12 Changeset [11064] by
- Fixed a bug in UnLibToolize with short filenames.
- 18:12 Changeset [11063] by
- INtroduced a new class DimLog which ensures that the MessageDimTX is initialized _before_ the DimErrorRedirecter, otherwise a very early error could be emitted to the MessageDimTX even before it was instantiated.
- 17:48 Changeset [11062] by
- Removed some old obsolete comments and changed fatal errors to Fatal()
- 17:48 Changeset [11061] by
- Improved the output when a command was added; suppress anything inside Run() if fExitStatus was set already before Run() was called
- 17:47 Changeset [11060] by
- Call PrintBootMsg non-interactive in ConsoleStream
- 17:45 Changeset [11059] by
- Fixed an exception which was thrown if DimServer::itsName was NULL
- 13:43 Changeset [11058] by
- Fixed adding the '.bin' extension to the filename in LOAD and SAVE
- 12:12 Changeset [11057] by
- Removed RunDim and replaces it with RunShell and LocalStream
- 12:12 Changeset [11056] by
- Removed RunDim and replaces it with RunShell and LocalStream
06/17/11:
- 16:27 Changeset [11055] by
- Updated.
- 10:18 Changeset [11054] by
- Removed some obsolete old code; added check for fDimFadFiles; don 't switch off fFadWidget by default
- 09:56 Changeset [11053] by
- Added ConsoleStream class
- 09:55 Changeset [11052] by
- Added --exec command
- 09:54 Changeset [11051] by
- Added the comment command (#)
- 09:54 Changeset [11050] by
- Added the comment (#) command and the LocalStream class
- 09:52 Changeset [11049] by
- Added some comments.
06/16/11:
- 23:05 Changeset [11048] by
- Added 'quit' to execute; added IsStopped to check for the 'quit' in Execute
- 21:54 Changeset [11047] by
- Added output in case of errors when the .s command is enetered.
- 21:41 Changeset [11046] by
- Removed an obsolete comment.
- 21:27 Changeset [11045] by
- Added possibility to block execution until the state machine has reached a given state.
- 21:27 Changeset [11044] by
- Added '.w' to list of commands.
- 21:26 Changeset [11043] by
- Added the --exec command.
- 21:25 Changeset [11042] by
- Added time to output in Execute
- 19:55 Changeset [11041] by
- Replaced interpretation of single characters by the interpretation of unsigned numbers (uint8_t)
- 19:42 Changeset [11040] by
- Removed obsolete include of tools.h
- 19:41 Changeset [11039] by
- 'UnLibToolize' the program name.
- 19:40 Changeset [11038] by
- Make sure the pointer passed to rl_readline_name is kept valid.
- 19:39 Changeset [11037] by
- Replaced deprecated boost::filesystem::basename; removed libtoolize workaround
- 18:50 Changeset [11036] by
- Changed color palette; do not use disabled pixels for color scale; make sure the DIM_DNS/VERSION service has the right size; set chatserv LED to gray when offline; do not display debug messages in CHAT window
- 18:37 Changeset [11035] by
- Added fscctrl and fsc, removed some obsolete libraraies
- 17:46 Changeset [11034] by
- Added some more implementation.
- 17:08 Changeset [11033] by
- 13:54 Changeset [11032] by
- Added output of blocked state to ListSlots()
- 11:09 Changeset [11031] by
- Implemented BLOCK_TRANSMISSION, SEND_CMD and SEND_DATA
- 10:33 Changeset [11030] by
- added configuration parameters
06/15/11:
- 11:41 Changeset [11029] by
- added inserting fObservationKEY into the table ScheduledRun
- 11:01 Changeset [11028] by
- Allow C:N as Dim format
- 11:01 Changeset [11027] by
- Allow support for chars; assume that the given size is the destination size
- 09:57 Changeset [11026] by
- Implemented that even chars are returned as numbers if converted to a string; ToFits will now just ignore string types
06/14/11:
- 20:14 Changeset [11025] by
- Changed schedule-database-name back to be a required option.
- 19:08 Changeset [11024] by
- fixed name
- 18:43 Changeset [11023] by
- Changed schedule-database-name from required to default empty
- 18:42 Changeset [11022] by
- Added more const qualifiers.
- 18:27 Changeset [11021] by
- Changed name from schedule-database to schedule-database-name
- 18:06 Changeset [11020] by
- Commented out some checks; mysqlpp throws exceptions
- 18:04 Changeset [11019] by
- Many structural updates; catch mysqlpp exceptions outside Scheudle(); added error state; added reset command to get out of the error state
- 16:45 Changeset [11018] by
- Don't assign dbname to something which might be local.
06/13/11:
- 22:25 Changeset [11017] by
- Removed the wrong string conversion from ToFits; fixed the sanity check in the loop; added a check to check for only valid types.
- 18:07 Changeset [11016] by
- Improved some logging output; added some debug output for each report; fixed the check to which files the service should go.
- 18:05 Changeset [11015] by
- Added some const-qualifiers.
- 17:06 Changeset [11014] by
- Fixed some limits; some improvements to the output
- 17:05 Changeset [11013] by
- Some little updates; added DataFileDebug
- 17:04 Changeset [11012] by
- Fixed compilation of chatserv.
- 17:03 Changeset [11011] by
- Fixed a compilation problem introduced with the latest changes.
06/11/11:
- 00:30 Changeset [11010] by
- Set '192.168.0.255' as default address because it is a broadcast address.
06/10/11:
- 23:21 Changeset [11009] by
- Added new library where needed.
- 23:11 Changeset [11008] by
- Removed obsolete Dim.cc
- 23:11 Changeset [11007] by
- Updated.
- 23:07 Changeset [11006] by
- Updated.
- 23:06 Changeset [11005] by
- A wrapper around dim's dns to set DIM_HOST_NODE automatically.
- 23:03 Changeset [11004] by
- 23:02 Changeset [11003] by
- Moved GetLocalIp and Setup to DimSetup
- 23:02 Changeset [11002] by
- Added a C-wrapper around GetLocalIp.
- 23:01 Changeset [11001] by
- Added libDimExtension.la and a wrapped dns
- 22:28 Changeset [11000] by
- 21:48 Changeset [10999] by
- Also print DIM_DNS_NODE.
- 21:48 Changeset [10998] by
- Added compile time to boot message, added interactive flag.
- 21:47 Changeset [10997] by
- Added boot message to interactive session.
- 21:40 Changeset [10996] by
- History allows to exclude services
- 20:47 Changeset [10995] by
- Added some example code to handle FITS errors.
- 20:31 Changeset [10994] by
- The pulic functions don't need to be pulic.
- 20:26 Changeset [10993] by
- Added a const-qualifier.
- 20:12 Changeset [10992] by
- More improvements to logging; log when files are opened and/or closed (to be completed); Simplified some messages
- 19:40 Changeset [10991] by
- Fixed a typo in a command description.
- 19:27 Changeset [10990] by
- Restructured some code; unified some functions; adapted some logging messages; removed the constants for the commands.
- 17:00 Changeset [10989] by
- 16:59 Changeset [10988] by
- 16:22 Changeset [10987] by
- Set the timeout between header and data to 500ms. 50ms was to small for the real FAD board. Maybe this timeout should be in the order of what is allowed by the ethernet?
- 16:15 Changeset [10986] by
- Replaces vector<Connection> by map<uint8_t, Connection> to allow empty slots for an efficient sending to all boards.
- 15:28 Changeset [10985] by
- Made the pixel mapping and patch mapping finally working -- although it might not be the final solution.
- 15:02 Changeset [10984] by
- Edd allows to set plot update rate
- 14:49 Changeset [10983] by
- Canceled conecction atempts now stop the connection atempt.
- 14:48 Changeset [10982] by
- As a workaround the FAD tab is already enabled in Connecting state - otherwise the LED status is not visible.
- 14:48 Changeset [10981] by
- Fixed sending a chat message.
- 13:17 Changeset [10980] by
- DIM event service contains active boards only
- 11:58 Changeset [10979] by
- Replaced Adc_data[1] by Adc_data[]
- 10:55 Changeset [10978] by
- Currently CmdWriteRate doesn't need an execute command.
- 10:54 Changeset [10977] by
- Added some debug messages to see when commands get posted and/or handled.
- 10:54 Changeset [10976] by
- Added a log-file for everything entered.
- 10:22 Changeset [10975] by
- Added lost line again.
- 09:54 Changeset [10974] by
- Moved update of stats and trim of old run numbers to functions
- 09:18 Changeset [10973] by
- Implemented the new execute command for the write command.
- 09:15 Changeset [10972] by
- Added a comment.
- 08:52 Changeset [10971] by
- Moved monitoring thread to main thread. Added timeout config
- 08:38 Changeset [10970] by
- new version 0x0200
- 08:23 Changeset [10969] by
- support for Firmware Version 0200
06/09/11:
- 23:31 Changeset [10968] by
- Added some const-qualifiers and did a few minor changes to the layout of the code.
- 23:04 Changeset [10967] by
- Check for NULL in Close
- 22:59 Changeset [10966] by
- Added an endl which had disappeared.
- 22:59 Changeset [10965] by
- Exchanged version and type in block header
- 21:16 Changeset [10964] by
- First version of writing data into binary files.
- 21:15 Changeset [10963] by
- Some new version -- now chnagelog informations available.
- 19:56 Changeset [10962] by
- Fixed ThresholdDisableOthers
- 19:43 Changeset [10961] by
- Added kMaxPatchIdx
- 19:43 Changeset [10960] by
- Fixed the all and all-except commands.
- 19:42 Changeset [10959] by
- Implemented Enable/Disable all button; added the correct hw/sw-pixel mapping; added the (in?)correct hw/sw patch mapping
- 19:35 Changeset [10958] by
- 19:35 Changeset [10957] by
- 17:26 Changeset [10956] by
- Read-out for FSC board
- 17:13 Changeset [10955] by
- added WriteError state
- 16:39 Changeset [10954] by
- Instead of comparing shared_ptr with NULL they are converted to bools to make it also compile on the ETH machine.
- 16:23 Changeset [10953] by
- Added the possibility to disable all patches/pixels except one.
- 15:47 Changeset [10952] by
- resolved conflict
- 15:44 Changeset [10951] by
- moved various processed from secondary thread to main thread
- 15:30 Changeset [10950] by
- Choose pixel even with double click; update enable.
- 14:28 Changeset [10949] by
- Added some code to write FITS files.
- 14:25 Changeset [10948] by
- Implemented Crate/Board/Patch in addition to pixel index.
- 14:05 Changeset [10947] by
- Fixed a typo.
- 13:29 Changeset [10946] by
- Changed order in Write; properly catch exceptions from Converter::ToFits
- 12:37 Changeset [10945] by
- Removed obsolete include of <mutex>
- 11:00 Changeset [10944] by
- Removed the obsolete extern-declaration for lock/unlock
- 10:50 Changeset [10943] by
- Fixed the output of the free space.
- 10:48 Changeset [10942] by
- Fixed format of EVENTS
- 10:47 Changeset [10941] by
- Fixed a dead-lock in the mutex by replacing it with the global dim-lock mechanism.
06/08/11:
- 20:20 Changeset [10940] by
- Adapted to latest changes in EventBuilder; added some Dim services.
- 20:17 Changeset [10939] by
- Some little layout improvements.
- 20:16 Changeset [10938] by
- Send some dim messages.
- 20:15 Changeset [10937] by
- Implemented some first FAD stuff.
- 20:14 Changeset [10936] by
- Decreased cpu usage for time display update.
- 20:13 Changeset [10935] by
- Set some names.
- 20:12 Changeset [10934] by
- Added some const-qualifier
- 20:10 Changeset [10933] by
- Removed the leading FACT- from the table names.
- 18:50 Changeset [10932] by
- Added some more const-qualifiers; replaced a local fTime by ftime; first check if it is a command before the black and white lists are checked
- 18:28 Changeset [10931] by
- Moved the default black list entries out of the check for the --block option; commented the default for DATA_LOGGER/ it gives troubles; added many const-qualifiers; fixed a few typoes in some output; localized the scoping of some iterators
- 18:04 Changeset [10930] by
- Moved Time argument as last and default argument in CompileFileName; some little changes to some output
- 17:19 Changeset [10929] by
- FTM: patch in LP interface to correct for swapped channels; change in FTUcontrol to fix first-board-bug
- 14:59 Changeset [10928] by
- Improved responsiveness of GUI at start-up
- 14:40 Changeset [10927] by
- Fixed a bug with the update of Fits files and grouping of daily files
06/07/11:
- 22:21 Changeset [10926] by
- Fixed setting run number.
- 22:20 Changeset [10925] by
- Suppress notice about sent data by define.
- 22:19 Changeset [10924] by
- Some small updates; added possibility for compilation under C and C++
- 22:18 Changeset [10923] by
- Adapted to latest version of code; first implementration of an interface to write files.
- 22:17 Changeset [10922] by
- Added a wait command.
- 22:16 Changeset [10921] by
- Added SendCommand taking a pointer and the size as argument.
- 22:16 Changeset [10920] by
- Started with the implementation of the FAD controls.
- 22:14 Changeset [10919] by
- Added local mutices to protect Write calls from different threads - the current implementation is even overprotective
- 19:29 Changeset [10918] by
- 17:10 Changeset [10917] by
- Renamed fPing to fFtuPing; added fFtuAllOn and fFtuAllOff buttons
- 14:34 Changeset [10916] by
- Added some primitive FAD controls and one connection LED per Board
06/06/11:
- 16:27 Changeset [10915] by
- 16:25 Changeset [10914] by
- 14:35 Changeset [10913] by
- FADctrl will write and publish data only for active boards
- 12:25 Changeset [10912] by
- Simplified temporary file handling
06/05/11:
- 18:37 Changeset [10911] by
- atmega thinks it receives 512 bytes all the time ... thats not true ...
- 17:40 Changeset [10910] by
Note:
See TracTimeline
for information about the timeline view.
