source: firmware/FAD/FACT_FAD_20MHz_VAR_PS

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @11212   13 years neise v0207 features DRS reset, but needs hardware mods. Do not use
(edit) @11173   13 years neise this is v0206 --- v0205 had a bug: when sending 'enable busy' ...
(edit) @11155   13 years neise v0205 changed ADC dataformat to unsigned short. - untested ... not ...
(edit) @11122   13 years neise Firmware version v0202 LEDs show: busy and w5300_reset DISCON after ...
(edit) @10989   13 years neise
(edit) @10988   13 years neise
(edit) @10970   13 years neise new version 0x0200
(edit) @10958   13 years neise
(edit) @10957   13 years neise
(edit) @10915   13 years neise
(edit) @10914   13 years neise
(edit) @10908   13 years neise
(edit) @10902   13 years neise
(edit) @10901   14 years neise gui stuff
(edit) @10900   14 years neise it compiles but doenst work....
(edit) @10892   14 years neise
(edit) @10891   14 years neise completed w5300_interface implementation. needs testing now
(edit) @10890   14 years neise minor changes
(edit) @10889   14 years neise memory_manager_2.vhd is a hopefully simpler version of the original ...
(edit) @10888   14 years neise - not yet tested; not yet simulated - w5300_modul2.vhd implements the ...
(edit) @10886   14 years neise new try to oout source the W5300 read/write access in order to get ...
(edit) @10883   14 years neise one week of changes in zurich :-(
(edit) @10744   14 years neise
(edit) @10738   14 years neise
(edit) @10729   14 years neise
(edit) @10724   14 years neise
(edit) @10567   14 years neise
(edit) @10566   14 years neise
(edit) @10565   14 years neise rrunnumber defaul is 0x1234abcd ... to check if it is visible in the ...
(edit) @10503   14 years neise
(edit) @10502   14 years neise soft & hardware trigger getrennt
(edit) @10500   14 years neise - FAD internal trigger ID reset is possible - with 0x"2A" - runnumber ...
(edit) @10462   14 years neise ADC data is not send in network byte order anymore. RS485 receiver is ...
(edit) @10240   14 years neise
(edit) @10225   14 years neise new data format implemented. setting of DAC during run is possible.
(edit) @10182   14 years neise
(edit) @10180   14 years neise at least P&R runs again
(edit) @10178   14 years neise
(edit) @10176   14 years neise
(edit) @10174   14 years neise
(edit) @10173   14 years neise beautify
(edit) @10172   14 years neise still unstable
(edit) @10170   14 years neise still unstable
(edit) @10156   14 years neise still unstable
(edit) @10155   14 years neise highly unstable version !!!
(edit) @10154   14 years neise FSM changed to one process style
(edit) @10149   14 years neise REFCLK counter asserts alarm outputs at first place. phase shifter ...
(edit) @10145   14 years neise
(edit) @10138   14 years neise
(edit) @10137   14 years neise added some comments and did some formating
(edit) @10136   14 years neise
(edit) @10135   14 years neise
(edit) @10134   14 years neise
(edit) @10133   14 years neise
(edit) @10132   14 years neise
(edit) @10131   14 years neise added some files - only important for HDL designer
(edit) @10129   14 years neise checking before change of Event Header structure. added REFCLK counter ...
(edit) @10123   14 years neise jumper selectable MAC and IP address choice. D_T7 jumper selects if ...
(edit) @10122   14 years neise added missing files trigger_manager and some hds files to repos
(edit) @10121   14 years neise synchronous trigger handling added continous soft trigger generation. ...
(edit) @10081   14 years neise DRS write shift register & write config register
(edit) @10078   14 years neise possible to choose, which socket is used for data transmission. only ...
(edit) @10076   14 years neise different socket modes - untested
(edit) @10075   14 years neise LED controller debugged
(edit) @10074   14 years neise added LED controller
(edit) @10073   14 years neise
(edit) @10072   14 years neise block to block communication debugged - part 1
(add) @9912   14 years neise most recent version quasi initial commit
Note: See TracRevisionLog for help on using the revision log.