Timeline
12/04/13:
- 14:48 TroubleShootingLid created by
- added documentation about lid
- 14:46 TroubleShooting edited by
- added section lid (diff)
12/03/13:
- 18:53 ScreenSessionHelpfulCommands edited by
- (diff)
- 18:06 Changeset [17405] by
- Change working directory to directory which contains the link or the start.sh to ensure that relative links work properly.
12/02/13:
- 18:28 DataTakingMainPage edited by
- adding, how to submit an own schedule file to the schedule database (diff)
11/30/13:
- 19:10 Changeset [17404] by
- Output pixel index in case of underflow.
- 19:10 Changeset [17403] by
- Only park telescope during ovtest when it is deep dark time.
11/29/13:
- 18:12 Changeset [17402] by
- Updated to allow a real streaming, even for shrunk files.
- 13:02 Changeset [17401] by
- Set beginskip and endskip as explicit argument in GetPixelStats; do not process the last 10 samples, they are affected by the 10-sample sliding average.
- 13:00 Changeset [17400] by
- To determine the maximum devision by 8 is not necessary, only for the result; added a safety check for a sqrt-argument less than 0; added arguments to set beginskip and endskip
- 10:51 CodingRules edited by
- (diff)
- 10:30 CodingRules edited by
- (diff)
- 09:15 CodingRules edited by
- (diff)
- 09:07 CodingRules edited by
- (diff)
11/28/13:
11/27/13:
- 18:29 Changeset [17399] by
- Check (and wait a short time) whether server is online.
- 18:28 Changeset [17398] by
- Script to switch on and off drive power
- 17:49 Changeset [17397] by
- There was a typo in the wind gusts warning; 98 is too high...
- 16:36 Changeset [17396] by
- Added missing links
- 16:18 Changeset [17395] by
- Finally updated the function for the Pt1000 to something which is almost exact within 5-25deg
- 16:17 Changeset [17394] by
- Increased the interval in which events are selected close to the 5s update interval in smartfact; so more events are scanned and the probability is higher to catch a nice one.
11/26/13:
- 22:13 TemplateShiftSummary edited by
- (diff)
- 19:16 Changeset [17393] by
- Fixed a bug which caused replace() to fail. Memory was reallocated and so the pointer was wrong; simplified the retrieval of table names.
- 19:14 Changeset [17392] by
- Simplified: keep a list of all skipped tables. There is no need to lop over the whole file for every table which is a log(n) process.
- 16:48 Changeset [17391] by
- Script for smartfact web interface.
- 16:40 Changeset [17390] by
- Script for smartfact web interface.
- 16:18 CodingRules edited by
- (diff)
- 16:16 CodingRules edited by
- (diff)
- 16:16 CodingRules edited by
- (diff)
- 16:14 CodingRules edited by
- (diff)
- 15:49 CodingRules edited by
- (diff)
- 15:45 CodingRules edited by
- (diff)
- 15:41 CodingRules edited by
- (diff)
- 15:40 CodingRules edited by
- (diff)
- 15:35 CodingRules edited by
- (diff)
- 15:34 CodingRules edited by
- (diff)
- 15:34 CodingRules edited by
- (diff)
- 12:33 Changeset [17389] by
- Updated Dim service description.
- 11:57 CodingRules edited by
- (diff)
- 11:50 CodingRules edited by
- (diff)
- 11:45 CodingRules edited by
- (diff)
- 11:44 CodingRules edited by
- (diff)
- 11:40 CodingRules edited by
- (diff)
- 11:40 CodingRules edited by
- (diff)
- 11:39 CodingRules created by
- 11:09 SvnRules created by
- 10:55 WikiStart edited by
- (diff)
11/25/13:
- 22:33 Changeset [17388] by
- Removes svn:ignored. Black magic. Only leads to confusion if consistency is not ensured.
- 22:31 Changeset [17387] by
- Removed svn:executable property, these are no executables.
- 22:28 Changeset [17386] by
- Removed svn:executable property, these are no executables.
- 22:25 Changeset [17385] by
- emoved svn:ignore property. This is black magic and can easily lead to confusion if not set on new directories. It is a nice feature, but not needed at all.
- 21:44 Changeset [17384] by
- Cleanup of the includes; my suspicion is that the math.h is for the sqrt (which is not needed, and should be in trinagular brackets as in all other files). To get a common namespace, I replaced it by TMath::Sqrt.
- 21:40 Changeset [17383] by
- Some important conmetics: Define variables as const whenever you can, never declare veriables earlier as they are used; if you feel the need to list them, use comments; do never declare you own TRandom object - the root/Mars environment takes care of it (global seed, and which TRandom class to use\!)
- 21:25 Changeset [17382] by
- Simplified conditional.
- 21:21 Changeset [17381] by
- Files moved to their own subdirectory to keep everything at least a bit well arranged.
- 21:20 Changeset [17380] by
- Files removed here because they are not part of the default setup.
- 21:19 Changeset [17379] by
- Files moved here because they are not part of the default setup.
- 19:58 Changeset [17378] by
- When sending an interrupt there was some typo in the array index.
- 19:54 Changeset [17377] by
- Print call execution time to log.
- 19:50 Changeset [17376] by
- Updated to display 1440 pixels now in event display
- 19:50 Changeset [17375] by
- Handle the case when /home/fact is not defined, this can happen for example when the web user calls dimctrl via php exec()
- 19:49 Changeset [17374] by
- Updated because we show all 1440 pixels now
- 19:49 Changeset [17373] by
- Unified all exec calls, suppress logging (actually only a warning message) when dimctrl is called
- 18:14 Changeset [17372] by
- Updated to use extract_aux.C
- 18:11 Changeset [17371] by
- Removed obsolete variable definition.
- 18:09 Changeset [17370] by
- Renamed and added more auxiliary infomrations.
- 17:38 WikiStart edited by
- (diff)
- 17:38 WikiStart edited by
- (diff)
- 17:32 WikiStart edited by
- (diff)
- 17:24 FactGps edited by
- (diff)
11/23/13:
- 19:35 Changeset [17369] by
- Fixed aproblem with the new temperature hist and the displayed GPS time.
- 18:28 Changeset [17368] by
- Do not display 1e2 for the currents if they exceed 100uA
- 18:05 Changeset [17367] by
- Missed the correct calculation of the coefficient derived from the angle to the moon.
- 17:58 Changeset [17366] by
- Updated prediction with something which takes the distance to the moon into account; updated database access
- 14:51 Changeset [17365] by
- 14:47 Changeset [17364] by
- After startup the status line was blue instead of white.
- 14:38 Changeset [17363] by
- Added GPS control and links to temperature and agilent.
- 14:38 Changeset [17362] by
- Added server name to startup message.
- 14:37 Changeset [17361] by
- Removed a stray paranthesis
- 14:36 Changeset [17360] by
- The description in the DATA service were in the wrong order
- 14:36 Changeset [17359] by
- Added TEMPERATURE/DATA, AGILENT_CONTROL/DATA and GPS_CONTROL/NEMA
- 13:31 DataTakingMainPage edited by
- (diff)
- 13:15 Changeset [17358] by
- Added forward declaration for std::mutex
- 13:15 Changeset [17357] by
- Fixed a compilation error.
- 13:09 Changeset [17356] by
- Switch trigger off before lid is closed to avoid smartfact complainaing about dropping rates; added an the irq 'off' which stops the current run and turns off voltage; added GPS_CONTROL to the checks.
- 13:08 Changeset [17355] by
- Added OVTEST as valid task
- 13:07 Changeset [17354] by
- Use more accurate information to restore the last DRS calib.
- 13:07 Changeset [17353] by
- Added OVTEST as valid task; reduced the number of hours the schedule is retrieved from the past; this is a problem is one starts Main.js early in the evening in winter.
- 13:06 Changeset [17352] by
- Check the number of received ext1 triggers at the end of each run.
- 13:05 Changeset [17351] by
- Wait longer for Armed... it might take a moment.
- 13:05 Changeset [17350] by
- Adapted the resource type to the zofits argument types
- 13:02 Changeset [17349] by
- Included gpsctrl into startup procedure.
- 13:01 Changeset [17348] by
- A more efficient handling and more options for the path to the log files.
- 13:00 Changeset [17347] by
- Display when lid is moving.
- 13:00 Changeset [17346] by
- Updated the temperature coefficient of the Pt1000 to better fit the range we are interested in 5..30degC
- 12:59 Changeset [17345] by
- Automatically try to send STOP if after an UNLOCK the systme is in error.
- 12:59 Changeset [17344] by
- We don't need a warning if the history file cannot be opened, it might simply not exist.
- 12:58 Changeset [17343] by
- Removed DimWriteStatistics::CreateDirectory - can be replaced by boost::filesystem::create_directories (we loose the ability to set permissions explicitly, but linux users are used to get inherited permission for directory creation anyway
11/22/13:
11/21/13:
- 19:17 DatatakingLimits edited by
- (diff)
- 17:45 Changeset [17342] by
- Adapted to the changes in MessageImp to allow the datalogger to write the date-change in the log file as well.
- 17:43 Changeset [17341] by
- Implemented an output if between two messages, the date changes. This makes it easier to follow a long log file.
- 17:32 Changeset [17340] by
- Fixed an option description.
- 17:31 Changeset [17339] by
- Use the new ReadGrid from Interpolator2D
- 17:26 Changeset [17338] by
- Updated the interface to have an option to read directly from a file.
- 17:25 Changeset [17337] by
- Removed unused arguments to suppress compiler warning.
- 17:25 Changeset [17336] by
- Added a new spike removal algorithm; changed the interface from 'all pixels' to #one pixel' to allow procesing a single pixel in debugging cases.
- 17:24 Changeset [17335] by
- Implemented a fourth spike removal algorithm. The spike removal is now valid only for a single pixel - this makes it easier to use for debugging.
- 17:22 Changeset [17334] by
- Removed an unused argument to suppress compiler warning.
- 17:20 Changeset [17333] by
- Added the arguments from the Makefile to the AcliC call - this was mainly to get the no-exception handling.
- 17:18 Changeset [17332] by
- Added a trigger counter in the run and event object and count the events; replaced the arguments to Open/Write/Close to have access to the full infomation including the trigger counters; added a new service TRIGGER_COUNTER
- 17:15 Changeset [17331] by
- 75s is too short, because in the case of the first event, it can happen that there is no request for 90s. So 105s is ok.
- 17:15 Changeset [17330] by
- Give access to the full information in Open/Write/Close
- 17:14 Changeset [17329] by
- Removed trigger counter - this is now done globally; adapted function calls to get access to the new information.
- 12:42 Changeset [17328] by
- Switched to new spike removeal algorithm; added filenames without extensions as option.
- 12:40 Changeset [17327] by
- Updated query to account for new sql version
- 12:38 Changeset [17326] by
- Added code to extract hv-patch wise temperatures from aux files.
11/19/13:
- 19:27 Changeset [17325] by
- The status is requested once in a minute, so it is pointless to check for it once every 45s. Changed to 75s
- 18:45 Changeset [17324] by
- Changed file format to zFits; do not require all pixels to be at the correct voltage - this just takes unnecessarily long; stop trigger before switching voltage off or on to avoid a smartfact warning; allow to set the overvoltage; before moving ramp down the voltage to Uov=0; added single-pe run to shutdown; added task 'OVTEST'
- 17:51 DataTakingMainPage edited by
- (diff)
- 17:45 DataTakingMainPage edited by
- (diff)
- 17:42 ScreenSessionHelpfulCommands edited by
- (diff)
- 13:16 WikiStart edited by
- (diff)
11/17/13:
- 20:30 Changeset [17323] by
- According to a simply toy MC this reproduces the behaviour of the sensor best and reproduces very well the measured dark count spectra.
11/16/13:
- 19:37 Changeset [17322] by
- Fixed a bug which caused the macro to be executed twice.
- 19:37 Changeset [17321] by
- Fixed a bug which caused the macro to be executed twice.
11/14/13:
- 23:39 DataTakingMainPage edited by
- (diff)
- 22:35 RemoteControlHardware edited by
- (diff)
- 22:30 DataTakingMainPage edited by
- (diff)
- 22:24 DataTakingMainPage edited by
- (diff)
- 22:08 DataTakingMainPage edited by
- (diff)
- 22:04 DataTakingMainPage edited by
- (diff)
- 22:00 DataTakingMainPage edited by
- (diff)
- 21:58 DataTakingMainPage edited by
- (diff)
- 21:57 ManuallyStartup edited by
- (diff)
- 16:45 Changeset [17320] by
- Implemented missing Overcurrent state.
- 16:44 Changeset [17319] by
- Added some crosschecks for the switching of the night after an recent incident. This should never be necessary but it doesn't harm either, and the reason for the incident is still unknown.
- 16:44 Changeset [17318] by
- Updated query for case sensitivity of database.
- 02:54 DataTakingMainPage edited by
- (diff)
- 02:51 DataTakingMainPage edited by
- (diff)
- 02:40 DataTakingCheckList edited by
- (diff)
- 02:37 DataTakingCheckList edited by
- (diff)
- 02:37 DataTakingMainPage edited by
- (diff)
- 02:34 DataTakingMainPage edited by
- (diff)
- 02:29 ScheduleTemplate edited by
- (diff)
- 02:29 ScheduleTemplate edited by
- (diff)
- 02:28 ScheduleTemplate edited by
- (diff)
- 02:20 DataTakingMainPage edited by
- (diff)
- 02:19 DataTakingMainPage edited by
- (diff)
- 02:09 DataTakingCheckList edited by
- (diff)
- 02:08 DataTakingCheckList edited by
- (diff)
Note:
See TracTimeline
for information about the timeline view.
