Data Taking Procedure - Main Page

Remarks

• This is just a short introduction/summary for doing a shift. For more informations (and for becoming an expert) follow the links!!
• There are always changes to the system. Therefore please check this pages and the ​shift forum regularly.
• The system is being automatized more and more, but this doesn't mean that there is nothing to do anymore. Monitoring the system is very important.

---

Datataking Check List

DataTakingCheckList: Check List for a whole shift. Be aware that you have to read the following points also, not only the Check list!

---

Preparation

Preparation before going on shift:

• PreparationBeforeGoingOnShift

Preparation before nightly shift

• read ALL ​logbook and ​shift forum entries
• start well in advance so that you still have time to contact the experts in case of problems or questions

---

Startup

0. open Smartfact
1. open the gtc-skycamera image and the weather station of Magic (see ​https://fact-project.org/)
2. open a ssh-connection to newdaq to submit scripts
3. open the page ​http://www.fact-project.org/showlog/index.php (for checking the logfiles)
   • use your own account for this and not the fact user!
   • different logs can be checked by adding the name of the program, e.g. ​http://www.fact-project.org/showlog/?log=dimserver or ​https://www.fact-project.org/showlog/?log=magiclidar
4. ​Introduction for a VPN session gives a helpful introduction for a VPN session to La Palma
5. connect to the screen session on newdaq. See ScreenSessionHelpfulCommands for a list of helpful commands for screen sessions
6. open VNC-session :04 on gui and VNC-session :02 on aux
   • start GUI (if not already running): FACT++/factGL
7. start the Shiftsummary in the logbook:

Shift summary

The shift summary (first entry) has to contain the following information:

• contact details
• planned schedule
• achieved schedule
• problems
• ORM alerts

See Template for Shift Summary

9. plan the schedule:

Schedule

• fill the schedule according to the thread "observations (month JJJJ)" in the ​shift forum
• use the ​visibility and current prediction plots to plan the sources to observe
• for finding a good position for a ratescan, you can use software planetariums like stellarium or KStars
  • good position for a ratescan: zd < 10°, no bright star in the field of view
• edit ~/operation/scripts/schedule.js
  • you can find the formate of the schedule in the ScheduleTemplate
  • don't forget to change the date of the observation tasks
  • you can add several task to one observation, for example a ratescan following by normal datataking
  • if you specify the coordinate, notice: ra is in decimal hours and dec in decimal degree

Remark: When there is not first-drs-calib until the start of astronomical twilight, please skip it (i.e. the single pe run), as data taking has first priority.

10. start dimctrl client in any terminal: /home/fact/operation/dimctrl
    • Power Drive:
      • PWR_CONTROL/TOGGLE_DRIVE
    • unlock Drive:
      • DRIVE_CONTROL/UNLOCK
    • stop dimctrl: .q
11. insert schedule to database: in /home/fact/operation : dimctrl --quit --cmd ".js scripts/updateSchedule.js"
12. Start TPoint-camera
    • visit the page 10.0.100.230 from the La Palma Network
    • Login and start the TPoint Camera
13. Check status of the Telescope in the TPoint Camera and the ​IR Camera
14. All other task of the startup are performed by the Main.js script (see first point of Datataking)
    • The list of the ManuallyStartup is currently not needed

---

Datataking

• start Datataking script from a bash with following command in ~/operation:
  • dimctrl --start scripts/Main.js
• don't forget to write the corresponding logbook entries and the comments in the run-comment DB:

Datataking entries

General remarks:

• please fill the logbook in realtime, i.e. the entries should have the correct time stamps for better traceability of problems - otherwise, please note the time stamp when something happened
• problems / information for single runs have to be inserted in the ​run-comment DB
  • these are for example:
  • fad losses
  • tracking stops
  • car flash
• make a single entry for every measurement you do (one entry for every source, for every technical measurement ...)
• insert following informations
  • weather: skybrightness, clouds, calima, ... i.e. any information that cannot be retrieved from the auxiliary files
  • write down how long what take and how much time you loose by treating problems
  • any problem with hardware or software, therefore write down exactly what you did
  • please report also mistakes or missing information in the manuals so that they can be fixed/added

TemplateNormalDatatakingSet

TemplateQuotingLogFiles

You can find the list of the taken runs at: ​https://www.fact-project.org/smartfact/#observations

• if you have to start a dim-script for yourself, call it with following command from a bash:
  • dimctrl --batch ScriptsForDimCtrl/<scriptname>.dim
• Be aware of the DatatakingLimits
• If you have to track manually (the script sends the tracking commands, so the manually tracking is not needed normally), have a look at the CurrentPointingPositions
• To control the hardware remotely, please have a look at RemoteControlHardware
• For details of the different procedures of the datataking, see the DatatakingProcedures
  • be aware that all steps mentioned there are currently proceeded by the scripts and it is not needed to perform them manually.

Remark: Please have in mind that datataking has first priority, i.e. first restart the script, then do the logbook entry.

---

Trouble Shooting

• never stop a not hanging program with ctrl+c
  • when a restart of the program is really necessary use .q instead
  • restarting a program is in most cases not a solution and only increase the risk to trigger more problems. So avoid restarting programs as long as possible
• TroubleShooting

Most common problems:

• troubleshooting#tsfadloss FAD losses
• troubleshooting#tsdrivectrl Drive Error

---

Shutdown

• After the shutdown task in the schedule was proceeded you have to do the the following task to finish the shutdown:
• stop datataking script with following command from a bash:
  • dimctrl --stop
• make sure that
  • no script is running
  • the bias is off
  • the trigger is off
  • the lid is closed
    • check TPoint Camera
    • stop TPoint Camera after check (via the page 10.0.100.230 from the internal network)
  • the telescope is parked
    • check ​IR Camera
  • biasctrl disconnected
  • all logbook entries are finished
• stop the drive by:
  • in dimctrl: PWR_CONTROL/TOGGLE_DRIVE