Timeline


and

May 18, 2011:

6:47 PM Changeset [10744] by neise
6:46 PM Changeset [10743] by neise
5:20 PM Changeset [10742] by vogler
FTM Timing counters added
4:00 PM Changeset [10741] by lyard
added configurable grouping and did some cosmetics to the code (removed tabs)
1:59 PM Changeset [10740] by weitzel
several bugfixes for FTM firmware
12:01 PM Changeset [10739] by lyard
Added Fits grouping
7:30 AM Changeset [10738] by neise

May 17, 2011:

9:02 PM Changeset [10737] by tbretz
Fixed a compiler error.
9:00 PM Changeset [10736] by tbretz
Addec ode for trigger signal enables and for pixel disable.
8:59 PM Changeset [10735] by tbretz
Added DISABLE_PIXEL
8:49 PM Changeset [10734] by tbretz
Added EnablePixel to StaticData.
8:22 PM Changeset [10733] by tbretz
Small layout changes; added spin box for pixel index and checkbox for enable; replaced temperature plot by rate plot
8:20 PM Changeset [10732] by tbretz
Time stamp and trigger counter are now reset when data taking is started/stopped.
8:19 PM Changeset [10731] by tbretz
Improved error output.
8:18 PM Changeset [10730] by tbretz
Fixed a bug in bitcpy
6:29 PM Changeset [10729] by neise
4:08 PM Changeset [10728] by tbretz
Fixed Reset() of camera widget.
4:05 PM Changeset [10727] by tbretz
Some fixes about LPext and LPint; DimStaticData::fEnable is now 90 not 80.
4:03 PM Changeset [10726] by tbretz
Some fixes about LPext and LPint; DimStaticData::fEnable must be 90 not 80.
2:30 PM Changeset [10725] by lyard
Small changes asked by Thomas
7:10 AM Changeset [10724] by neise

May 16, 2011:

4:17 PM Changeset [10723] by tbretz
Renamed TQtWidget to RootWidget to allow for HAVE_ROOT
4:16 PM Changeset [10722] by tbretz
4:10 PM Changeset [10721] by tbretz
Initialize fState.
4:10 PM Changeset [10720] by tbretz
Improved some log-output.
4:09 PM Changeset [10719] by tbretz
Added some comments.
3:49 PM Changeset [10718] by tbretz
Updated.
3:48 PM Changeset [10717] by tbretz
Added HAVE_ROOT
3:47 PM Changeset [10716] by tbretz
Changed 1338 to 1440, fixed initialization in camera widget, enabled time display on temp axis.
2:36 PM Changeset [10715] by tbretz
Added kTakingData as green FTM led state.

May 13, 2011:

8:16 PM Changeset [10714] by tbretz
Some small simplifications.
8:04 PM Changeset [10713] by tbretz
Some fixed to the doxygen docu
8:03 PM Changeset [10712] by tbretz
Some fixed to the doxygen docu
8:03 PM Changeset [10711] by tbretz
Exclude the moc-files.
4:59 PM Changeset [10710] by tbretz
Allow a stopped StateMachine to exit the readline prompt.
4:48 PM Changeset [10709] by tbretz
Removed the use of the Configuration class internal 'database' option, replaces by schedule-database as in triggerschedule and made it the first positional argument.
3:49 PM Changeset [10708] by tbretz
Named some enums.
3:48 PM Changeset [10707] by tbretz
Use the functionality of boost program_options better; implemented po_bool() as a special po_switch() case; added some comments.
3:36 PM Changeset [10706] by neise
3:35 PM Changeset [10705] by neise
3:10 PM Changeset [10704] by tbretz
Added some comments.
3:08 PM Changeset [10703] by tbretz
Moved Reverse functions to ByteOrder.h
3:07 PM Changeset [10702] by tbretz
Moved helper functions to ByteOrder.h
2:18 PM Changeset [10701] by tbretz
Updated initialization procedure to fit the other executables.
1:38 PM Changeset [10700] by tbretz
Fixed Dim format of TRIGGER_COUNTER and replaced Multiplicity by MULTIPLICITY in event names:
12:51 PM Changeset [10699] by tbretz
Adapted to some latest changes.
12:39 PM Changeset [10698] by neise
11:48 AM Changeset [10697] by neise
11:36 AM Changeset [10696] by tbretz
Removed an obviously wrong comment.
11:32 AM Changeset [10695] by tbretz
Updated package section.
11:25 AM Changeset [10694] by tbretz
Removed namespace defintion from header; moved obsolete includes to source file.
11:24 AM Changeset [10693] by tbretz
Implemented support for compilation without fits.

May 12, 2011:

10:55 PM Changeset [10692] by tbretz
Added some little text.
10:55 PM Changeset [10691] by tbretz
Added some docu; renamed Coincidence to multiplicity.
10:04 PM Changeset [10690] by tbretz
Updated docu according to latest changes.
9:59 PM Changeset [10689] by tbretz
Switched off subdirs again, because the links to the inline dot-graphs got broken.
9:52 PM Changeset [10688] by tbretz
Renamed AddConfiguration and AddTransition to AddEvent
9:41 PM Changeset [10687] by tbretz
Renamed MainWindow to FACT++
9:40 PM Changeset [10686] by tbretz
Added TOC.
8:42 PM Changeset [10685] by tbretz
Switched off pdflatex, it doesn't work here
8:06 PM Changeset [10684] by tbretz
Added the missing section name for the installroot section.
7:15 PM Changeset [10683] by tbretz
7:10 PM Changeset [10682] by tbretz
Updated.
7:07 PM Changeset [10681] by tbretz
Output what AX_BOOST_BASE has detected; replaced my boost library names by the ones detecte3d by the AX_BOOST macros.
7:06 PM Changeset [10680] by tbretz
Added some hint about the TQtWidget warning from root.
7:05 PM Changeset [10679] by tbretz
To simplify the interaction with the GUI SET_*_COINCIDENCE has been splitted; fixed setting of the trigger sequence; removed some debug output.
7:04 PM Changeset [10678] by tbretz
Implemented a fix which should avoid that the GUI is playing ping-pong with e.g. the ftmctrl. This is done through a wrapper around all infoHandlers. In ceratin circumstances (mainly when signals of the kind valueChanged are emitted) it is advicable to not send the values back to the emitter if their origin is the handler.
5:47 PM Changeset [10677] by neise
1:44 PM Changeset [10676] by tbretz
Updated some typos and the layout of the help text.
12:17 PM Changeset [10675] by lyard
imporved setup, run number can be changed without sending commands
10:15 AM Changeset [10674] by neise
ethernet with user interface test

May 11, 2011:

7:08 PM Changeset [10673] by tbretz
Updated.
7:08 PM Changeset [10672] by tbretz
7:07 PM Changeset [10671] by tbretz
Renamed sendcommand to triggerschedule; added triggerschedule.man; added missing src/chatclient.cc
7:04 PM Changeset [10670] by tbretz
Adapted to the internal structure of all other programs.
6:53 PM Changeset [10669] by tbretz
Updated to use the Dim- and FACT-namespace helpers.
6:34 PM Changeset [10668] by neise
6:33 PM Changeset [10667] by neise
5:58 PM Changeset [10666] by tbretz
Make sure that also zeroes are correctly extracted even if the last character in the stream is a zero.
4:24 PM Changeset [10665] by tbretz
Changed 'last changed' time for LEDs from local time to time of received service.
3:11 PM Changeset [10664] by tbretz
Changed FTU numbers from 1-10 to 0-9 and renamed group box Temperatures to FTM Temperatures.
2:53 PM Changeset [10663] by tbretz
Changed the logic of dumping the two output buffers.
2:52 PM Changeset [10662] by tbretz
Set the sttaus back to connecting if a connection attempt is not yet finished.
2:52 PM Changeset [10661] by tbretz
Removed obsolete comment block
10:30 AM Changeset [10660] by tbretz
Updated.
10:28 AM Changeset [10659] by tbretz
Added or improved documentation.
10:28 AM Changeset [10658] by tbretz
Removed some obsolete moc-productions.
10:27 AM Changeset [10657] by tbretz
Added or improved documentation.

May 10, 2011:

7:37 PM Changeset [10656] by tbretz
Changed pathname to dim.
7:33 PM Changeset [10655] by tbretz
Little changed to the command descriptions.
7:32 PM Changeset [10654] by tbretz
Added script execution.
2:48 PM Changeset [10653] by tbretz
Added Dim.cc
2:48 PM Changeset [10652] by tbretz
2:44 PM Changeset [10651] by tbretz
Removed sending static data 100 times when loaded from file which was put there for testing purpose.
2:11 PM Changeset [10650] by tbretz
Moved setting of color of LEDs to a common function which will also set the time of the last color change automatically.
2:10 PM Changeset [10649] by tbretz
Some little improvements to output.
2:10 PM Changeset [10648] by tbretz
Initialize DIM's environment variables through Dim::Setup
2:10 PM Changeset [10647] by tbretz
Initialize DIM's environment variables through Dim::Setup; made command line switches in a way they give reasonable defaults.
2:09 PM Changeset [10646] by tbretz
Initialize DIM's environment variables through Dim::Setup
2:08 PM Changeset [10645] by tbretz
New namespace to host some common Dim helper functions.
2:07 PM Changeset [10644] by tbretz
Moved some Dim code to new Dim.h/Dim.cc
2:06 PM Changeset [10643] by tbretz
Enabled creation of subdirectories.
1:11 PM Changeset [10642] by ogrimm
FADctrl publishes amplitude calibration information as DIM service
12:59 PM Changeset [10641] by tbretz
Added clock showing UTC of local machine.
11:00 AM Changeset [10640] by tbretz
Fixed the Converter::GetHex for the col==0 case.
8:52 AM Changeset [10639] by weitzel
FTM: keep-alive of Wiznet actiated, clock conditioner interface updated, trigger ID sending updated

May 9, 2011:

10:44 PM Changeset [10638] by tbretz
Updated with latest experiences installing FACT++ on Ubuntu 11.04 (natty)
9:33 PM Changeset [10637] by tbretz
Added some descriptions.
8:18 PM Changeset [10636] by tbretz
Moved dist_man1_MANS up; removed empty ChatClient.cc
8:16 PM Changeset [10635] by tbretz
Unified help output more; echanged constructors of DimDescribedService
8:16 PM Changeset [10634] by tbretz
Added unified text before printing Options.
8:15 PM Changeset [10633] by tbretz
Fixed case of sclaing in Rates plot == 0
8:15 PM Changeset [10632] by tbretz
Replaced old with new constructors.
8:13 PM Changeset [10631] by tbretz
Unified help output more; removed global use of namespace FTM
8:12 PM Changeset [10630] by tbretz
Unified help output more.
8:12 PM Changeset [10629] by tbretz
Unified help output more.
8:11 PM Changeset [10628] by tbretz
Unified help output more.
8:10 PM Changeset [10627] by tbretz
Connected enables for trigger lines.
8:10 PM Changeset [10626] by tbretz
Connected enables for trigger lines.
8:10 PM Changeset [10625] by tbretz
Replaces 'Hz' by 's'

May 8, 2011:

9:48 PM Changeset [10624] by dorner
implemented --dbname and its evaluation for the scheduler
4:49 PM Changeset [10623] by tbretz
Added command to control the trigger sequence and the trigger majority logic; added a consistency check for an arrived static data block.
4:48 PM Changeset [10622] by tbretz
Added getter for general settings and trigger sequence.
4:48 PM Changeset [10621] by tbretz
Removed obsolete check boxes for LPint/LPext and Pedestal
4:47 PM Changeset [10620] by tbretz
Implemented trigger sequence and trigger coincidences.
4:46 PM Changeset [10619] by tbretz
Unified Trigger Sequence and General Settings; enabled trigger sequence by default; disabled clock conditioner by default.

May 6, 2011:

1:30 PM Changeset [10618] by dorner
added some checks for fixed observations and time range for scheduling
1:16 PM Changeset [10617] by ogrimm
New FAD event format implemented
11:44 AM Changeset [10616] by tbretz
Changed link to new dim version.
11:44 AM Changeset [10615] by tbretz
10:17 AM Changeset [10614] by tbretz
New release V19 r20
10:10 AM Changeset [10613] by tbretz
Fixed a missing return and a warning about a comparison operator.
10:07 AM Changeset [10612] by tbretz
Fixed BOOST_VERSION number
10:02 AM Changeset [10611] by tbretz
Removed obsolete #error -- was successfully tested to work.
9:58 AM Changeset [10610] by tbretz
Removed obsolete #error -- was successfully tested to work.
9:56 AM Changeset [10609] by tbretz
Updated
9:55 AM Changeset [10608] by tbretz
Moved ftm and ftmctrl to 'all'; made sure that help2man finds the executale even if PATH doesn't contain ./
9:53 AM Changeset [10607] by tbretz
Updated
9:52 AM Changeset [10606] by tbretz
Added support for boost 1.42 even with gcc 4.5; added many new commands; added FTM_COUNTROL/COUNTER
9:50 AM Changeset [10605] by tbretz
9:50 AM Changeset [10604] by tbretz
Added widgets for FTM_CONTROL/COUNTER; replaced default QSpingBox for Clock conditioner by SpinBoxHex
9:49 AM Changeset [10603] by tbretz
The default now is not to overwrite files in .aux_dir
9:48 AM Changeset [10602] by tbretz
Added SET_PRESCALING
9:48 AM Changeset [10601] by tbretz
Added FTM_CONTROL/COUNTER
9:43 AM Changeset [10600] by tbretz
Added fix because gcc 4.5 is not supported by boost 1.42 which are both part of natty.
9:41 AM Changeset [10599] by tbretz
Enccapsulated in ifdef.
9:41 AM Changeset [10598] by tbretz
Don't show error data block - it gives an exception - to be fixed.
8:16 AM Changeset [10597] by tbretz
Encapsulated into ifdef.

May 5, 2011:

10:27 PM Changeset [10596] by dorner
added filling of intermediate observation lists and filling of fixed observations into db
9:40 PM Changeset [10595] by tbretz
Changed some widgets to read-only.
9:39 PM Changeset [10594] by tbretz
Fixed sent value in SET_TRIGGER_INTERVAL.
9:37 PM Changeset [10593] by tbretz
Fixed type of fClockConditioner; added proper byte swapping for fClockConditioner; some improvements to output; fixed printing of error message.
3:17 PM Changeset [10592] by tbretz
Reaplaced LP1 by Lpext
2:24 PM Changeset [10591] by tbretz
Removed the annoying warning about the linagage of shared objects.
9:21 AM Changeset [10590] by dorner
added executable sendcommand
9:21 AM Changeset [10589] by dorner
added executable to send command (to scheduler)
7:58 AM Changeset [10588] by neise
added MSR Firmware MSR is the little brother of FSC

May 4, 2011:

8:41 PM Changeset [10587] by tbretz
Removed some debug oputput which enetered by chance with the last commit
8:38 PM Changeset [10586] by tbretz
Changed the logic in Run() in a way that fExitRequeted is reset at the end of Run. In that way we can also catch exit requsts which were set before Run() was even called.
8:36 PM Changeset [10585] by tbretz
Added some random errors.
8:36 PM Changeset [10584] by tbretz
Fixed some slot names.
8:35 PM Changeset [10583] by tbretz
Added the right exit handler.
8:35 PM Changeset [10582] by tbretz
Ignore RPC calls.
8:34 PM Changeset [10581] by tbretz
Fixed SetVal
5:22 PM Changeset [10580] by tbretz
Added scheduler LED.
4:27 PM Changeset [10579] by tbretz
Changed a llittle bit the formatting of print to make it also readable in the html output of the gui.
4:25 PM Changeset [10578] by tbretz
Changed a llittle bit the formatting of print to make it also readable in the html output of the gui.
4:04 PM Changeset [10577] by tbretz
Removed some debug output.
4:03 PM Changeset [10576] by tbretz
Fixed the first typo in the new text.
4:01 PM Changeset [10575] by tbretz
Added descriptions for commands and services.
3:26 PM Changeset [10574] by tbretz
Renamed LP1/LP2 to Lpint/LPext
3:26 PM Changeset [10573] by tbretz
Unified the new setters.
3:26 PM Changeset [10572] by tbretz
Fixed some broken output.
3:25 PM Changeset [10571] by tbretz
Sort service and command names alphabetically.
3:17 PM Changeset [10570] by tbretz
Improved/fixed the retrieval of times from Dim once again.
3:15 PM Changeset [10569] by tbretz
Improved the retrieval of time-stamps once again from Dim; fixed the divider of the free space in the logger tab; replaced LP1/LP2 by LPint/LPext
3:13 PM Changeset [10568] by tbretz
Some small fixes.
2:35 PM Changeset [10567] by neise
2:13 PM Changeset [10566] by neise
2:11 PM Changeset [10565] by neise
rrunnumber defaul is 0x1234abcd ... to check if it is visible in the header at all trigger_id_reset pulse is prolonged, fron 20ns to 60ns.
1:53 PM Changeset [10564] by tbretz
By mistake two {-brackets entered the svn -- removed.
1:50 PM Changeset [10563] by tbretz
Removed the warning about linking the shared object to the executable.
1:50 PM Changeset [10562] by tbretz
Updated.
1:48 PM Changeset [10561] by tbretz
Added SET_TRIGEGR_INTERVAL, SET_TRIGGER_DELAY, SET__TIME_MARKER_DELAY, SET_DEAD_TIME.
1:47 PM Changeset [10560] by tbretz
Changed the way the infoHandlers are called to make sure also the first call to the infoHandler is always catched.
1:45 PM Changeset [10559] by tbretz
Added an error in case readline was not found
1:44 PM Changeset [10558] by tbretz
Renamed kMaxInterval to kMaxTriggerInterval
1:40 PM Changeset [10557] by tbretz
Implemented sending SET_TRIGGER_DELAY, SET_TRIGGER_INTERVAL, SET_DEAD_TIME and SET_TIME_MARKER_DELAY
10:22 AM Changeset [10556] by tbretz
Proper display of the FTU states.
10:21 AM Changeset [10555] by tbretz
Implemented ENABLE_FTU and TOGGLE_FTU
10:20 AM Changeset [10554] by tbretz
Fixed a 64bit issue for DimFtuList::IsActive; added ToggleFTU
10:19 AM Changeset [10553] by tbretz
Implemented the command to send when clicking on the FTU Leds
10:18 AM Changeset [10552] by tbretz
Some design issues; made the FTU LEDs checkable
9:51 AM Changeset [10551] by tbretz
Fixed some treatment of 64bit values.
9:50 AM Changeset [10550] by tbretz
Added some comments about shared libraries.
8:49 AM Changeset [10549] by lyard
bug fix: wrong code when fits are opened

May 3, 2011:

8:53 PM Changeset [10548] by tbretz
Implemented a status LED for the FTUs
8:53 PM Changeset [10547] by tbretz
Implemented a status LED for the FTUs
7:31 PM Changeset [10546] by tbretz
Disabled Dim padding to be able to properly receive reports; initialize time-stamp in infoHandler
7:28 PM Changeset [10545] by tbretz
Added getter for a bool.
7:25 PM Changeset [10544] by tbretz
Removed obsolete include of TQtTimer
7:25 PM Changeset [10543] by tbretz
Added HeadersFTM.cc to fact.
6:28 PM Changeset [10542] by tbretz
Added SetThreshold and CheckEventSize; some comment to remind me what work to do tomorrow.
6:27 PM Changeset [10541] by tbretz
Added some helpful output to the arguments
6:26 PM Changeset [10540] by tbretz
Send SetThreshold if a value is changed.
6:26 PM Changeset [10539] by tbretz
Added references to Qt
6:25 PM Changeset [10538] by tbretz
Added some more data to the FTU list.
6:25 PM Changeset [10537] by tbretz
Encapsulated SQL support into ifdef.
6:23 PM Changeset [10536] by tbretz
Updated the data logger widgets; added better handling of the FTM::DimError service.
6:22 PM Changeset [10535] by tbretz
Added more details to Error.
6:19 PM Changeset [10534] by tbretz
Added some code to get rid of the getcwd warning - we have to go through all warnings and errors again anyway; use the build in boolean for the commands
5:25 PM Changeset [10533] by dorner
added scheduler
5:22 PM Changeset [10532] by tbretz
Removed the annoying warning about linking shared objects and executables.
5:21 PM Changeset [10531] by dorner
removed sched.cc as it was only for tests
5:20 PM Changeset [10530] by dorner
added program for scheduler
2:04 PM Changeset [10529] by lyard
Various bug fixes and new commands added
10:49 AM Changeset [10528] by tbretz
Implemented Ping-button.
10:05 AM Changeset [10527] by tbretz
Updated.
10:04 AM Changeset [10526] by tbretz
Replaces output for HAS_ROOT_QT qith yes/no
10:03 AM Changeset [10525] by tbretz
Added Number of responding boards and boards in crate to DimFtuList
10:02 AM Changeset [10524] by tbretz
Encapsulated root stuff into ifdef's; removed the root update timer - it is not necessary if we don't allow user interaction; implemented more accurate colors for the FTU Leds
9:47 AM Changeset [10523] by tbretz
Some additions about root.

May 2, 2011:

11:24 PM Changeset [10522] by tbretz
Removed DimNetworkInfo; instead implemented proper initialization of the time-stamp in all infoHandlers
7:58 PM Changeset [10521] by tbretz
Fixed chat led.
7:37 PM Changeset [10520] by tbretz
7:13 PM Changeset [10519] by tbretz
Ensure Timestamp is correctly initialized.
7:12 PM Changeset [10518] by tbretz
Added latest changes, which includes almost a complete FTM support and implements root-plots.
7:11 PM Changeset [10517] by tbretz
Added first version (not documented at all) of the fake-ftm and the ftmctrl
7:10 PM Changeset [10516] by tbretz
Updated.
7:10 PM Changeset [10515] by tbretz
Some updates; tried to fix the deocumentation if's
7:07 PM Changeset [10514] by tbretz
Ensure Timestamp is correctly initialized.
7:06 PM Changeset [10513] by tbretz
Ensure Timestamp is correctly initialized.
7:06 PM Changeset [10512] by tbretz
replace the address of the first element by the data() member function
7:05 PM Changeset [10511] by tbretz
Added exit handler; call exit handler in case of fatal error; add Dim id to messages.
7:04 PM Changeset [10510] by tbretz
Moved exit handler to DimErrorRedirecter.
7:03 PM Changeset [10509] by tbretz
Ensure Timestamp is correctly initialized.
6:58 PM Changeset [10508] by tbretz
Removed dependence on Tools::Format()
6:57 PM Changeset [10507] by tbretz
6:55 PM Changeset [10506] by tbretz
6:54 PM Changeset [10505] by tbretz
2:56 PM Changeset [10504] by neise
supports new FAD event format: setting runnumber resetting internat trigger ID
10:19 AM Changeset [10503] by neise
10:11 AM Changeset [10502] by neise
soft & hardware trigger getrennt

May 1, 2011:

2:04 PM Changeset [10501] by tbretz
Added text about padding in Dim.

Apr 29, 2011:

2:55 PM Changeset [10500] by neise
- FAD internal trigger ID reset is possible - with 0x"2A" - runnumber will be written into EVent header (32bit) default is zero.
1:53 PM Changeset [10499] by lyard
Small fixes
1:25 PM Changeset [10498] by tbretz
Use stringstreams to replace Form not strings and +=
1:09 PM Changeset [10497] by tbretz
Removed the last usage of Tools::Form.
1:06 PM Changeset [10496] by tbretz
Removed usage of Tools::Form.
12:51 PM Changeset [10495] by tbretz
Added server name to Event name.
12:50 PM Changeset [10494] by tbretz
The new convention is to return always the server name in GetCommandList - removed the server name from the list.
12:47 PM Changeset [10493] by tbretz
Allow server names to end with a slash.
12:47 PM Changeset [10492] by tbretz
Return more info about statet which were not found in GetState.
12:46 PM Changeset [10491] by tbretz
Added some comment.
11:52 AM Changeset [10490] by tbretz
Fixed a severe bug in destructor deleting the fEventQueue elements, do not go to IsRunning() state in Run(dummy==true) mode.
10:19 AM Changeset [10489] by lyard
Added a number of subscriptions service and better error handling
9:48 AM Changeset [10488] by tbretz
EXIT command was ignored when running in a shell - fixed.

Apr 28, 2011:

5:36 PM Changeset [10487] by tbretz
Some cosmetics to output.
5:35 PM Changeset [10486] by tbretz
Remove redundant trailing \0s from strings.
2:03 PM Changeset [10485] by tbretz
Fixed a valgrind warning about mixing delete and free()
2:02 PM Changeset [10484] by tbretz
Exchanged the order of the STATE and the STATE_LIST for logical reasons.
12:20 PM Changeset [10483] by tbretz
Switched to new version.
12:20 PM Changeset [10482] by tbretz
Removed old version.
12:17 PM Changeset [10481] by tbretz
Used DimInfo by mistake instead of DimStampedInfo.
11:59 AM Changeset [10480] by tbretz
New version V19r19 with some important bug fixes.
11:10 AM Changeset [10479] by tbretz
Disable padding for all dim transfer.
11:08 AM Changeset [10478] by tbretz
Updated - fixed a typo.
11:08 AM Changeset [10477] by tbretz
Added descriptions for the service itself and for the default Dim services.
11:07 AM Changeset [10476] by tbretz
Changed the services to described services.
11:06 AM Changeset [10475] by tbretz
Changed the QTextDocument to be of a fixed size so that no horizontal scroll bars are needed.

Apr 27, 2011:

2:45 PM Changeset [10474] by lyard
Added more services + define for single run-fits or not
10:02 AM Changeset [10473] by tbretz
Fixed compilation errors.
10:01 AM Changeset [10472] by tbretz
Fixed compilation errors.
9:55 AM Changeset [10471] by tbretz
Use a C-string as argument for path()
9:55 AM Changeset [10470] by tbretz
Removed using error_code directly.

Apr 26, 2011:

7:12 PM Changeset [10469] by tbretz
Fixed a typo. I have no idea why that compiled here.
6:57 PM Changeset [10468] by tbretz
Just code cosmetics.
6:56 PM Changeset [10467] by tbretz
Disallow C with a number larger than 0 in strict mode - it gives problems.
6:54 PM Changeset [10466] by tbretz
Added proper resizing by adding layout hints when the tab is recreated.
6:49 PM Changeset [10465] by tbretz
Fixed a typo in the output.
6:44 PM Changeset [10464] by tbretz
Updated.
6:44 PM Changeset [10463] by tbretz
Fixed another problem with the motif detection - the wrong language was used.
4:40 PM Changeset [10462] by neise
ADC data is not send in network byte order anymore. RS485 receiver is implemented --> needs testing internal trigger ID is used for socket number calculation
11:36 AM Changeset [10461] by tbretz
Little additions.
11:35 AM Changeset [10460] by tbretz
Moved common part of Mjd(), GetUnixTime() into SecondsOfDay(); renamed GetUnixTime to UnixTime() and added RootTime()
11:34 AM Changeset [10459] by tbretz
Upadted.
11:33 AM Changeset [10458] by tbretz
Added IS_FALSE, IS_TRUE and a proper treatment of the Motif-check; the check was done, but nothing happened with the result.
11:32 AM Changeset [10457] by tbretz
Found a way to add some targets without having them in 'all'; made compilation of did conditional.
11:23 AM Changeset [10456] by tbretz
Renamed conditional to HAS_LIBXP

Apr 24, 2011:

4:57 PM Changeset [10455] by tbretz
Added a spin box which only allows numbers dividable by 4.

Apr 22, 2011:

8:50 PM Changeset [10454] by tbretz
Added GetUnixTime
7:35 PM Changeset [10453] by tbretz
Commented unused functions; fixed a bug in the naming of the services; replaced DimService by DimDescribedService; added dummy descriptions to states and events.
7:34 PM Changeset [10452] by tbretz
Added DimDescribedService; a described service which ensures that the description is available before the service itself, as needed by the data logger.

Apr 21, 2011:

10:10 PM Changeset [10451] by tbretz
Fixed the broken service names; changed default paths to something which will work on all or at least most systems.
9:45 PM Changeset [10450] by tbretz
Fixed a wrong info in a SetCurrentState call.
9:39 PM Changeset [10449] by tbretz
Added Print member function; fixed interpretation of hex and oct values
6:05 PM Changeset [10448] by weitzel
new FTM docu
5:40 PM Changeset [10447] by tbretz
Replaced HAS_QT4 by HAS_GUI; added ROOTGLIBS
5:37 PM Changeset [10446] by tbretz
Updated.
5:35 PM Changeset [10445] by tbretz
More output; added missing BOOST flags to LDFLAGS and CPPFLAGS.
1:58 PM Changeset [10444] by tbretz
Added a new GetHey template for simplification.
1:57 PM Changeset [10443] by tbretz
Allow giving root with and without bin directory.
12:27 PM Changeset [10442] by lyard
Added dataLogger services and use only one file for fits runs
11:17 AM Changeset [10441] by weitzel
new FTM firmware featuring e.g. start/stop run commands and new header
11:11 AM Changeset [10440] by weitzel
new version of FTM docu
9:50 AM Changeset [10439] by tbretz
Added new class DimNetworkInfo which initialized members secs and millisecs which remain uninitialized by Dim; set the default size of the nolink argument to 0, in this way we can distinguish between an empty string and nolink.

Apr 20, 2011:

11:24 PM Changeset [10438] by tbretz
Updated.
11:22 PM Changeset [10437] by tbretz
Some layout changes and new elements mainly in the Logger tab.
11:21 PM Changeset [10436] by tbretz
Removed obsolete VERSION service.
11:21 PM Changeset [10435] by tbretz
It doesn't seem to be necessary to link all root libraried explicitly.
11:20 PM Changeset [10434] by tbretz
Added root-path.m4
5:26 PM Changeset [10433] by tbretz
Added some stuff for the data logger; added a TQtWidget for playing; fixed a double name
5:21 PM Changeset [10432] by tbretz
Added root support to the GUI.
5:17 PM Changeset [10431] by tbretz
5:17 PM Changeset [10430] by tbretz
Added checks for root.
4:58 PM Changeset [10429] by tbretz
Moved the tools function into their own namespace to get rid of problems whenlinking with root.
3:26 PM Changeset [10428] by tbretz
Added some more infos.
3:25 PM Changeset [10427] by tbretz
Some paranoia change to the order of the data members to ensure proper destruction.
3:24 PM Changeset [10426] by tbretz
Use autoconf macros in PrintVersion
3:24 PM Changeset [10425] by tbretz
Changed the GetHex function; added support for hex and octal numbers.
3:23 PM Changeset [10424] by tbretz
Suppress server name when in PrintListOfEvents
3:22 PM Changeset [10423] by tbretz
Added boolean option to Print to suppress the SERVER name if any.
3:21 PM Changeset [10422] by tbretz
Fixed the millisecond part of the time, the Time class expects microseconds; some changes to the order of the data members to ensure a proper destruction.
3:20 PM Changeset [10421] by tbretz
Fixed the millisecond part of the time, the Time class expects microseconds; some changed to the help output.
3:19 PM Changeset [10420] by tbretz
Fixed the millisecond part of the time, the Time class expects microseconds.
3:19 PM Changeset [10419] by tbretz
Added GetName member function to StateClient for debugging purpose.
12:37 PM Changeset [10418] by weitzel
New FTM firmare: dna, fad_broadcast, FTU error messages, rates readout

Apr 19, 2011:

10:50 PM Changeset [10417] by tbretz
Added clear and resize buttons to the service tab, slight changes to the layout which allows to resize the warning dialog.
8:43 PM Changeset [10416] by tbretz
Little cosmetics.
8:29 PM Changeset [10415] by tbretz
Removed obsolete second and thrid button.
8:28 PM Changeset [10414] by tbretz
Some changes to the layout; removed the obsolete second and third LEDs
7:10 PM Changeset [10413] by tbretz
7:06 PM Changeset [10412] by tbretz
Added gui resource file.
7:04 PM Changeset [10411] by tbretz
7:04 PM Changeset [10410] by tbretz
Moved icons to resource file; some small tiny changes.

Apr 18, 2011:

5:55 PM Changeset [10409] by tbretz
Changed line wrap mode of log-window.
5:52 PM Changeset [10408] by tbretz
Removed a trailing '|' from the html output.
5:46 PM Changeset [10407] by tbretz
Added some text.
5:46 PM Changeset [10406] by tbretz
5:45 PM Changeset [10405] by tbretz
Added QT4 support.
5:44 PM Changeset [10404] by tbretz
Added the fact gui and QT4 support.
5:42 PM Changeset [10403] by tbretz
Added QT4 support.
5:42 PM Changeset [10402] by tbretz
Added QT4 support.
5:16 PM Changeset [10401] by tbretz
Implemented QT4 detection.
5:16 PM Changeset [10400] by tbretz
An m4 macro to detect QT4.
5:15 PM Changeset [10399] by tbretz
Some cosmetics.
5:15 PM Changeset [10398] by tbretz
Fixed a warning due to an unused argument.
5:13 PM Changeset [10397] by tbretz
Some cosmetics.
4:46 PM Changeset [10396] by tbretz
4:44 PM Changeset [10395] by tbretz
4:38 PM Changeset [10394] by tbretz
First version of the GUI.
2:58 PM Changeset [10393] by tbretz
Added descriptions for the virtual function.
2:36 PM Changeset [10392] by tbretz
Adapted the order in the call for the constructor of Description; added the 'standard way of priting usage and help informations'
2:33 PM Changeset [10391] by tbretz
Little fix to the comments
2:32 PM Changeset [10390] by tbretz
Moved the handling of the server and service lists to DimNetwork; simplified the remaining code accordingly; adapted to the use of DimServiceInfoList instead of ServiceList.
2:30 PM Changeset [10389] by tbretz
Added descriptions for the virtual function.
2:28 PM Changeset [10388] by tbretz
Added descriptions for the virtual function.
1:59 PM Changeset [10387] by tbretz
Fixed interpreting of zero length or strings shorter than expected.
1:58 PM Changeset [10386] by tbretz
Removed obsolete DistStateName
1:56 PM Changeset [10385] by tbretz
Moved setting of default states to a protected memeber function; made AddStateName virtual to allow StateMachineDim to overwrite it; changed color in PrintStateNames
11:02 AM Changeset [10384] by tbretz
Switch offf custom error handler in destructor.
11:01 AM Changeset [10383] by tbretz
Added functions to signal a state change.
10:59 AM Changeset [10382] by tbretz
Switch offf custom error handler in destrcutor.
10:58 AM Changeset [10381] by tbretz
Turned comment and unit in constructor, added a function to return a html formatted list.
10:57 AM Changeset [10380] by tbretz
Adapted call to constructor of Description.
10:56 AM Changeset [10379] by tbretz
Added service to provide the STATE_LIST with the available descriptions of the states.
10:54 AM Changeset [10378] by tbretz
New classes replacing ServiceList soon.
Note: See TracTimeline for information about the timeline view.