Timeline
05/27/11:
- 17:59 Changeset [10885] by
- Use GetBool and Ptr from EventImp directly.
- 17:58 Changeset [10884] by
- Changed stringstream to ostringstream for the use with MessageImp
- 17:51 Changeset [10883] by
- one week of changes in zurich :-(
- 17:44 Changeset [10882] by
- Use GetUXtra directly.
- 17:43 Changeset [10881] by
- Improved templates with range check; replaced return types by well defined types.
- 17:41 Changeset [10880] by
- Use new Ptr() template to access EventImp contents.
- 17:28 Changeset [10879] by
- FTM: new light pulser interface, new timing constraint in .ucf file
- 17:27 Changeset [10878] by
- Use GetText in pointer arithmetics.
- 17:26 Changeset [10877] by
- Added templates for easier access to the data.
- 17:19 Changeset [10876] by
- Implemented command to set run number.
- 17:19 Changeset [10875] by
- Use EventImp::GetBool; implemented SET_RUN_NUMBER
- 17:18 Changeset [10874] by
- Use EventImp::GetBool
- 16:30 Changeset [10873] by
- Replaced a self-done loop by std::find; changed some comments.
- 15:23 Changeset [10872] by
- Changed DIM prefix.
- 15:23 Changeset [10871] by
- Removed LocalControl.cc
- 15:21 Changeset [10870] by
- Remove the necessity for a source file (of just three lines)
- 15:17 Changeset [10869] by
- Unified return code with the convention that 0 is success.
- 15:15 Changeset [10868] by
- Addes some missing comments.
- 14:46 Changeset [10867] by
- Fixed units. 1024 would be kiB and MiB.
- 14:35 Changeset [10866] by
- Fixed units. 1024 would be kiB and MiB.
- 14:18 Changeset [10865] by
- Don't catch exceptions in main
- 14:18 Changeset [10864] by
- Don't catch exceptions in main; propagare continous number as board id.
- 14:17 Changeset [10863] by
- Improved verbosity; switched on printing channel headers.
- 13:36 Changeset [10862] by
- Added the possibility to fake more than just one board.
- 13:36 Changeset [10861] by
- Adapted Start() once more.
- 13:35 Changeset [10860] by
- Delete the line after CR.
- 13:34 Changeset [10859] by
- Added debug options to address the fake fad boards (debug-port and debug-num); Adapted Execute and fStatus2 to the fact that g_NumConnected has to be continous.
- 13:27 Changeset [10858] by
- Changed the data member cnt's name -- it sometimes gave warnings using cnt locally in derived classes.
- 13:27 Changeset [10857] by
- ftm definitions for Lightpulser Interface Basic (50MHz clock only) added
- 13:27 Changeset [10856] by
- Further improvement in Start(), accept negative numbers in NumConnect as disconnected.
- 13:26 Changeset [10855] by
- Lightpulser Basic version with 50MHz clock only added
- 12:22 Changeset [10854] by
- Allow to use several ports on localhost for several fake boards for testing.
- 12:21 Changeset [10853] by
- Fixed a floating point exception if no connection is open.
- 11:41 Changeset [10852] by
- Fixed workaround to open the seven sockets correctly; added some debug output in the file-handling.
- 11:40 Changeset [10851] by
- Added support for switching between command socket and data sockets.
- 11:39 Changeset [10850] by
- Removed some obsolete output.
- 11:39 Changeset [10849] by
- Added a section about blocking I/O
- 11:39 Changeset [10848] by
- Changed GetLocalIP code to boost::asio for better readability.
- 08:42 Changeset [10847] by
- FTM LP corrections
05/26/11:
- 23:36 Changeset [10846] by
- Start to listen on eight ports like the FAD boards.
- 23:35 Changeset [10845] by
- Improved workaround for ports.
- 23:34 Changeset [10844] by
- Print thread status is ListSlots()
- 17:11 Changeset [10843] by
- Added a workaround to pass the ports to the eventbuilder
- 17:10 Changeset [10842] by
- Some little fixed to the offline mode
- 16:41 Changeset [10841] by
- Added check in GetMaxMemory
- 16:19 Changeset [10840] by
- Added a comment about automake.
- 16:18 Changeset [10839] by
- Updated.
- 16:18 Changeset [10838] by
- Added fad target
- 16:17 Changeset [10837] by
- Some performance improvements; added some comments with code to fill just a histogram or a graph - maybe for later use.
- 16:16 Changeset [10836] by
- 16:16 Changeset [10835] by
- Added --max-mem program option; updated allowed states for CONNECT and DISCONNECT; added the offline state; propagate IP address to event-builder; moved EventBuilderWrapper to new file.
- 16:14 Changeset [10834] by
- Removed obsolete include of Timers.h
- 16:14 Changeset [10833] by
- An unknown Dim message is a warning now.
- 16:13 Changeset [10832] by
- Added state to signal whether the event-builder thread is still running or not.
- 16:13 Changeset [10831] by
- Replaces some Message calls by Info
- 16:12 Changeset [10830] by
- Added support for _GNU_SOURCE as needed by the event-builder.
- 15:47 Changeset [10829] by
- Moved many things to functions
- 09:20 Changeset [10828] by
- Added missing variable name in SendDynData
- 08:51 Changeset [10827] by
- Fixed ushort and short
05/25/11:
- 19:45 Changeset [10826] by
- 16:38 Changeset [10825] by
- Unified main() with the other programs
- 16:27 Changeset [10824] by
- Handle operation_aborted in timeouts
- 16:26 Changeset [10823] by
- Handle operation_aborted in timeouts; multiply timestamp by 10000; removed obsolete deadline_ data member
- 16:25 Changeset [10822] by
- Handle operation_aborted in timeouts; improved Connection::HandleSentData's output
- 14:46 Changeset [10821] by
- Removed the second HandleReadTimeout
- 14:28 Changeset [10820] by
- Removed the obsolete *_disable_padding() calls; DimErrorRedirecter takes care of it
- 14:18 Changeset [10819] by
- Replaced code copied from the Converter class by a proper function call
- 14:03 Changeset [10818] by
- Unified calls to MessageImp into ostrngstreams
- 13:44 Changeset [10817] by
- Moved commands here; added some more member functions.
- 13:43 Changeset [10816] by
- Moved commands to HeaderFAD; fixed the range of the loop to set all ROIs
- 13:42 Changeset [10815] by
- Take care of canceled timeouts.
- 13:18 Changeset [10814] by
- Upgrade of the dataLogger to take several run numbers on the fly
- 12:14 Changeset [10813] by
- Corrected dcm_ready and dcm_lock bit evaluation
- 08:45 Changeset [10812] by
- FTM doc directory cleaned up
05/24/11:
- 20:04 Changeset [10811] by
- Removed fake connections. We hav ethe event builder now.
- 19:38 Changeset [10810] by
- Updated.
- 19:37 Changeset [10809] by
- Moved fitsloader from obligatory to optional targets -- too many warnings.
- 19:36 Changeset [10808] by
- Renamed test3.cc to dimctrl.cc
- 19:36 Changeset [10807] by
- Renamed test3.cc to dimctrl.cc
- 19:35 Changeset [10806] by
- Renamed test3.cc to dimctrl.cc
- 19:34 Changeset [10805] by
- Simplified program options handling.
- 19:34 Changeset [10804] by
- Simplified program options handling.
- 18:08 Changeset [10803] by
- FTM: crate reset implemented
- 17:46 Changeset [10802] by
- Simplified program options handling.
- 17:43 Changeset [10801] by
- Removed colorsvn (doesn't exist) and cfitsio (is a requirement for CCfits anyway)
- 17:41 Changeset [10800] by
- Added fitsdump.man
- 17:39 Changeset [10799] by
- Simplified program options handling; only send enable of a general settings register if it changed at all; only sent trigger counter if the received report was dynamic data.
- 17:38 Changeset [10798] by
- Simplified program options handling.
- 17:37 Changeset [10797] by
- Simplified program options handling.
- 17:36 Changeset [10796] by
- Added PrintVersion directly to avoid clashes with exceptions.
- 16:56 Changeset [10795] by
- Replaced a stringstream by an ostringstream
- 16:54 Changeset [10794] by
- 16:52 Changeset [10793] by
- fitsdump - the program.
- 16:52 Changeset [10792] by
- Added fitsloader as an optional target; added fitsdump as an fixed target.
- 15:32 Changeset [10791] by
- forgotten file sigle_LP.vhd added
05/23/11:
- 15:44 Changeset [10790] by
- Added commands for crate reset.
- 15:42 Changeset [10789] by
- Added commands for crate reset.
- 15:20 Changeset [10788] by
- Update: FTM statis data block: Lightpulser interface
- 15:19 Changeset [10787] by
- Update: FTM statis data block: Lightpulser interface
- 15:16 Changeset [10786] by
- Adapted to change in SET_TRIGGER_SEQUENCE
- 15:15 Changeset [10785] by
- Fixed order of arguments in description of SET_TRIGGER_SEQUENCE; removed some obsolete whitespaces from some output; changed SET_TRIGGER_SEQUENCE from C:3 to S:3 to make it work correctly from the prompt.
- 15:09 Changeset [10784] by
- Added some code to redirect error output to fadctrl (still commented); replaces stringstream by ostringstream where needed.
- 15:06 Changeset [10783] by
- Moved soem decoding from print to header; commented obsolete Dim stuff.
- 15:05 Changeset [10782] by
- Minor changes to output.
- 15:05 Changeset [10781] by
- Commented out obsolete FAD stuff, implemented (untested) double click on axis for unzoom
- 15:04 Changeset [10780] by
- Replaced stringstream in log-stream by ostringstream.
- 15:00 Changeset [10779] by
- some changes in FTM Timing_counter
- 10:51 Changeset [10778] by
- 09:55 Changeset [10777] by
- Fixed boost problem with Ubuntu 11.04
- 09:54 Changeset [10776] by
- Updated
- 09:53 Changeset [10775] by
- Added fadctrl at the right place and drivectrl.
- 09:52 Changeset [10774] by
- 09:51 Changeset [10773] by
- 09:39 Changeset [10772] by
- 09:38 Changeset [10771] by
- Fixed a minor compiler warning.
- 09:00 Changeset [10770] by
- Fixed some unimportant compiler warnings.
- 08:55 Changeset [10769] by
- Added some widgets for the FTM (relative eff. on time, rate
- 08:55 Changeset [10768] by
- Keep FTM LED green even in data-taking mode; don't output FTM errors to the console; 'fixed' rate graph
- 08:51 Changeset [10767] by
- Deconded general setting for output, added some const-qualifiers
- 08:46 Changeset [10766] by
- Some improvement and name changes.
05/20/11:
- 13:28 Changeset [10765] by
- Made it compatible with older boost versions.
- 13:24 Changeset [10764] by
- Fixed a problem with older Qt versions.
- 13:13 Changeset [10763] by
- created a simple example about how to read fits
- 13:13 Changeset [10762] by
- Fixed output messages
- 12:50 Changeset [10761] by
- Lightpulser first version added
- 12:24 Changeset [10760] by
- FTM: reset of timing counters implemented
- 11:28 Changeset [10759] by
- Added a simple fits dumper
- 11:27 Changeset [10758] by
- Fixed an issue with CCfits exceptions handling
- 10:03 Changeset [10757] by
- Added thread cancellation handler to ensure mutex gets unlocked
05/19/11:
- 18:36 Changeset [10756] by
- 18:36 Changeset [10755] by
- 09:34 Changeset [10754] by
- 09:21 Changeset [10753] by
- working usb revision 10245 - modified for nice temperature printing command 'T'
- 08:56 Changeset [10752] by
- Connected output lines of FTM, enable/disable pixel and some first FAD stuff.
- 08:55 Changeset [10751] by
- Added FAD tab; some changed to FTM controls.
- 08:55 Changeset [10750] by
- Added FAD control widgets; added graphs for all rates delivered by FTM.
- 08:54 Changeset [10749] by
- Implemented enable/disable pixel; renamed kTimeMarker to kClockConditioner and adapted commands.
- 08:53 Changeset [10748] by
- Switch all pixels on by default.
- 08:52 Changeset [10747] by
- Improved exception output.
- 08:52 Changeset [10746] by
- Improved exception output.
- 08:52 Changeset [10745] by
- Renamed kTimeMarker to kClockConditioner; fixed Enable/DisablePixel
05/18/11:
- 18:47 Changeset [10744] by
- 18:46 Changeset [10743] by
- 17:20 Changeset [10742] by
- FTM Timing counters added
- 16:00 Changeset [10741] by
- added configurable grouping and did some cosmetics to the code (removed tabs)
- 13:59 Changeset [10740] by
- several bugfixes for FTM firmware
- 12:01 Changeset [10739] by
- Added Fits grouping
- 07:30 Changeset [10738] by
05/17/11:
- 21:02 Changeset [10737] by
- Fixed a compiler error.
- 21:00 Changeset [10736] by
- Addec ode for trigger signal enables and for pixel disable.
- 20:59 Changeset [10735] by
- Added DISABLE_PIXEL
- 20:49 Changeset [10734] by
- Added EnablePixel to StaticData.
- 20:22 Changeset [10733] by
- Small layout changes; added spin box for pixel index and checkbox for enable; replaced temperature plot by rate plot
- 20:20 Changeset [10732] by
- Time stamp and trigger counter are now reset when data taking is started/stopped.
- 20:19 Changeset [10731] by
- Improved error output.
- 20:18 Changeset [10730] by
- Fixed a bug in bitcpy
- 18:29 Changeset [10729] by
- 16:08 Changeset [10728] by
- Fixed Reset() of camera widget.
- 16:05 Changeset [10727] by
- Some fixes about LPext and LPint; DimStaticData::fEnable is now 90 not 80.
- 16:03 Changeset [10726] by
- Some fixes about LPext and LPint; DimStaticData::fEnable must be 90 not 80.
- 14:30 Changeset [10725] by
- Small changes asked by Thomas
- 07:10 Changeset [10724] by
05/16/11:
- 16:17 Changeset [10723] by
- Renamed TQtWidget to RootWidget to allow for HAVE_ROOT
- 16:16 Changeset [10722] by
- 16:10 Changeset [10721] by
- Initialize fState.
- 16:10 Changeset [10720] by
- Improved some log-output.
- 16:09 Changeset [10719] by
- Added some comments.
- 15:49 Changeset [10718] by
- Updated.
- 15:48 Changeset [10717] by
- Added HAVE_ROOT
- 15:47 Changeset [10716] by
- Changed 1338 to 1440, fixed initialization in camera widget, enabled time display on temp axis.
- 14:36 Changeset [10715] by
- Added kTakingData as green FTM led state.
05/13/11:
- 20:16 Changeset [10714] by
- Some small simplifications.
- 20:04 Changeset [10713] by
- Some fixed to the doxygen docu
- 20:03 Changeset [10712] by
- Some fixed to the doxygen docu
- 20:03 Changeset [10711] by
- Exclude the moc-files.
- 16:59 Changeset [10710] by
- Allow a stopped StateMachine to exit the readline prompt.
- 16:48 Changeset [10709] by
- Removed the use of the Configuration class internal 'database' option, replaces by schedule-database as in triggerschedule and made it the first positional argument.
- 15:49 Changeset [10708] by
- Named some enums.
- 15:48 Changeset [10707] by
- Use the functionality of boost program_options better; implemented po_bool() as a special po_switch() case; added some comments.
- 15:36 Changeset [10706] by
- 15:35 Changeset [10705] by
- 15:10 Changeset [10704] by
- Added some comments.
- 15:08 Changeset [10703] by
- Moved Reverse functions to ByteOrder.h
- 15:07 Changeset [10702] by
- Moved helper functions to ByteOrder.h
- 14:18 Changeset [10701] by
- Updated initialization procedure to fit the other executables.
- 13:38 Changeset [10700] by
- Fixed Dim format of TRIGGER_COUNTER and replaced Multiplicity by MULTIPLICITY in event names:
- 12:51 Changeset [10699] by
- Adapted to some latest changes.
- 12:39 Changeset [10698] by
- 11:48 Changeset [10697] by
- 11:36 Changeset [10696] by
- Removed an obviously wrong comment.
- 11:32 Changeset [10695] by
- Updated package section.
- 11:25 Changeset [10694] by
- Removed namespace defintion from header; moved obsolete includes to source file.
- 11:24 Changeset [10693] by
- Implemented support for compilation without fits.
05/12/11:
- 22:55 Changeset [10692] by
- Added some little text.
- 22:55 Changeset [10691] by
- Added some docu; renamed Coincidence to multiplicity.
- 22:04 Changeset [10690] by
- Updated docu according to latest changes.
- 21:59 Changeset [10689] by
- Switched off subdirs again, because the links to the inline dot-graphs got broken.
- 21:52 Changeset [10688] by
- Renamed AddConfiguration and AddTransition to AddEvent
- 21:41 Changeset [10687] by
- Renamed MainWindow to FACT++
- 21:40 Changeset [10686] by
- Added TOC.
- 20:42 Changeset [10685] by
- Switched off pdflatex, it doesn't work here
- 20:06 Changeset [10684] by
- Added the missing section name for the installroot section.
- 19:15 Changeset [10683] by
- 19:10 Changeset [10682] by
- Updated.
- 19:07 Changeset [10681] by
- Output what AX_BOOST_BASE has detected; replaced my boost library names by the ones detecte3d by the AX_BOOST macros.
- 19:06 Changeset [10680] by
- Added some hint about the TQtWidget warning from root.
- 19:05 Changeset [10679] by
- To simplify the interaction with the GUI SET_*_COINCIDENCE has been splitted; fixed setting of the trigger sequence; removed some debug output.
- 19:04 Changeset [10678] by
- Implemented a fix which should avoid that the GUI is playing ping-pong with e.g. the ftmctrl. This is done through a wrapper around all infoHandlers. In ceratin circumstances (mainly when signals of the kind valueChanged are emitted) it is advicable to not send the values back to the emitter if their origin is the handler.
- 17:47 Changeset [10677] by
- 13:44 Changeset [10676] by
- Updated some typos and the layout of the help text.
- 12:17 Changeset [10675] by
- imporved setup, run number can be changed without sending commands
- 10:15 Changeset [10674] by
- ethernet with user interface test
05/11/11:
- 19:08 Changeset [10673] by
- Updated.
- 19:08 Changeset [10672] by
- 19:07 Changeset [10671] by
- Renamed sendcommand to triggerschedule; added triggerschedule.man; added missing src/chatclient.cc
- 19:04 Changeset [10670] by
- Adapted to the internal structure of all other programs.
- 18:53 Changeset [10669] by
- Updated to use the Dim- and FACT-namespace helpers.
- 18:34 Changeset [10668] by
- 18:33 Changeset [10667] by
- 17:58 Changeset [10666] by
- Make sure that also zeroes are correctly extracted even if the last character in the stream is a zero.
- 16:24 Changeset [10665] by
- Changed 'last changed' time for LEDs from local time to time of received service.
- 15:11 Changeset [10664] by
- Changed FTU numbers from 1-10 to 0-9 and renamed group box Temperatures to FTM Temperatures.
- 14:53 Changeset [10663] by
- Changed the logic of dumping the two output buffers.
- 14:52 Changeset [10662] by
- Set the sttaus back to connecting if a connection attempt is not yet finished.
- 14:52 Changeset [10661] by
- Removed obsolete comment block
- 10:30 Changeset [10660] by
- Updated.
- 10:28 Changeset [10659] by
- Added or improved documentation.
- 10:28 Changeset [10658] by
- Removed some obsolete moc-productions.
- 10:27 Changeset [10657] by
- Added or improved documentation.
05/10/11:
- 19:37 Changeset [10656] by
- Changed pathname to dim.
- 19:33 Changeset [10655] by
- Little changed to the command descriptions.
- 19:32 Changeset [10654] by
- Added script execution.
- 14:48 Changeset [10653] by
- Added Dim.cc
- 14:48 Changeset [10652] by
- 14:44 Changeset [10651] by
- Removed sending static data 100 times when loaded from file which was put there for testing purpose.
- 14:11 Changeset [10650] by
- Moved setting of color of LEDs to a common function which will also set the time of the last color change automatically.
- 14:10 Changeset [10649] by
- Some little improvements to output.
- 14:10 Changeset [10648] by
- Initialize DIM's environment variables through Dim::Setup
- 14:10 Changeset [10647] by
- Initialize DIM's environment variables through Dim::Setup; made command line switches in a way they give reasonable defaults.
- 14:09 Changeset [10646] by
- Initialize DIM's environment variables through Dim::Setup
- 14:08 Changeset [10645] by
- New namespace to host some common Dim helper functions.
- 14:07 Changeset [10644] by
- Moved some Dim code to new Dim.h/Dim.cc
- 14:06 Changeset [10643] by
- Enabled creation of subdirectories.
- 13:11 Changeset [10642] by
- FADctrl publishes amplitude calibration information as DIM service
- 12:59 Changeset [10641] by
- Added clock showing UTC of local machine.
- 11:00 Changeset [10640] by
- Fixed the Converter::GetHex for the col==0 case.
- 08:52 Changeset [10639] by
- FTM: keep-alive of Wiznet actiated, clock conditioner interface updated, trigger ID sending updated
05/09/11:
- 22:44 Changeset [10638] by
- Updated with latest experiences installing FACT++ on Ubuntu 11.04 (natty)
- 21:33 Changeset [10637] by
- Added some descriptions.
- 20:18 Changeset [10636] by
- Moved dist_man1_MANS up; removed empty ChatClient.cc
- 20:16 Changeset [10635] by
- Unified help output more; echanged constructors of DimDescribedService
- 20:16 Changeset [10634] by
- Added unified text before printing Options.
- 20:15 Changeset [10633] by
- Fixed case of sclaing in Rates plot == 0
- 20:15 Changeset [10632] by
- Replaced old with new constructors.
- 20:13 Changeset [10631] by
- Unified help output more; removed global use of namespace FTM
- 20:12 Changeset [10630] by
- Unified help output more.
- 20:12 Changeset [10629] by
- Unified help output more.
- 20:11 Changeset [10628] by
- Unified help output more.
- 20:10 Changeset [10627] by
- Connected enables for trigger lines.
- 20:10 Changeset [10626] by
- Connected enables for trigger lines.
- 20:10 Changeset [10625] by
- Replaces 'Hz' by 's'
05/08/11:
- 21:48 Changeset [10624] by
- implemented --dbname and its evaluation for the scheduler
- 16:49 Changeset [10623] by
- Added command to control the trigger sequence and the trigger majority logic; added a consistency check for an arrived static data block.
- 16:48 Changeset [10622] by
- Added getter for general settings and trigger sequence.
- 16:48 Changeset [10621] by
- Removed obsolete check boxes for LPint/LPext and Pedestal
- 16:47 Changeset [10620] by
- Implemented trigger sequence and trigger coincidences.
- 16:46 Changeset [10619] by
- Unified Trigger Sequence and General Settings; enabled trigger sequence by default; disabled clock conditioner by default.
05/06/11:
- 13:30 Changeset [10618] by
- added some checks for fixed observations and time range for scheduling
- 13:16 Changeset [10617] by
- New FAD event format implemented
- 11:44 Changeset [10616] by
- Changed link to new dim version.
- 11:44 Changeset [10615] by
- 10:17 Changeset [10614] by
- New release V19 r20
- 10:10 Changeset [10613] by
- Fixed a missing return and a warning about a comparison operator.
- 10:07 Changeset [10612] by
- Fixed BOOST_VERSION number
- 10:02 Changeset [10611] by
- Removed obsolete #error -- was successfully tested to work.
- 09:58 Changeset [10610] by
- Removed obsolete #error -- was successfully tested to work.
- 09:56 Changeset [10609] by
- Updated
- 09:55 Changeset [10608] by
- Moved ftm and ftmctrl to 'all'; made sure that help2man finds the executale even if PATH doesn't contain ./
- 09:53 Changeset [10607] by
- Updated
- 09:52 Changeset [10606] by
- Added support for boost 1.42 even with gcc 4.5; added many new commands; added FTM_COUNTROL/COUNTER
- 09:50 Changeset [10605] by
- 09:50 Changeset [10604] by
- Added widgets for FTM_CONTROL/COUNTER; replaced default QSpingBox for Clock conditioner by SpinBoxHex
- 09:49 Changeset [10603] by
- The default now is not to overwrite files in .aux_dir
- 09:48 Changeset [10602] by
- Added SET_PRESCALING
- 09:48 Changeset [10601] by
- Added FTM_CONTROL/COUNTER
- 09:43 Changeset [10600] by
- Added fix because gcc 4.5 is not supported by boost 1.42 which are both part of natty.
- 09:41 Changeset [10599] by
- Enccapsulated in ifdef.
- 09:41 Changeset [10598] by
- Don't show error data block - it gives an exception - to be fixed.
- 08:16 Changeset [10597] by
- Encapsulated into ifdef.
05/05/11:
- 22:27 Changeset [10596] by
- added filling of intermediate observation lists and filling of fixed observations into db
- 21:40 Changeset [10595] by
- Changed some widgets to read-only.
- 21:39 Changeset [10594] by
- Fixed sent value in SET_TRIGGER_INTERVAL.
- 21:37 Changeset [10593] by
- Fixed type of fClockConditioner; added proper byte swapping for fClockConditioner; some improvements to output; fixed printing of error message.
- 15:17 Changeset [10592] by
- Reaplaced LP1 by Lpext
- 14:24 Changeset [10591] by
- Removed the annoying warning about the linagage of shared objects.
- 09:21 Changeset [10590] by
- added executable sendcommand
- 09:21 Changeset [10589] by
- added executable to send command (to scheduler)
- 07:58 Changeset [10588] by
- added MSR Firmware MSR is the little brother of FSC
05/04/11:
- 20:41 Changeset [10587] by
- Removed some debug oputput which enetered by chance with the last commit
- 20:38 Changeset [10586] by
- Changed the logic in Run() in a way that fExitRequeted is reset at the end of Run. In that way we can also catch exit requsts which were set before Run() was even called.
- 20:36 Changeset [10585] by
- Added some random errors.
- 20:36 Changeset [10584] by
- Fixed some slot names.
- 20:35 Changeset [10583] by
- Added the right exit handler.
- 20:35 Changeset [10582] by
- Ignore RPC calls.
- 20:34 Changeset [10581] by
- Fixed SetVal
- 17:22 Changeset [10580] by
- Added scheduler LED.
- 16:27 Changeset [10579] by
- Changed a llittle bit the formatting of print to make it also readable in the html output of the gui.
- 16:25 Changeset [10578] by
- Changed a llittle bit the formatting of print to make it also readable in the html output of the gui.
- 16:04 Changeset [10577] by
- Removed some debug output.
- 16:03 Changeset [10576] by
- Fixed the first typo in the new text.
- 16:01 Changeset [10575] by
- Added descriptions for commands and services.
- 15:26 Changeset [10574] by
- Renamed LP1/LP2 to Lpint/LPext
- 15:26 Changeset [10573] by
- Unified the new setters.
- 15:26 Changeset [10572] by
- Fixed some broken output.
- 15:25 Changeset [10571] by
- Sort service and command names alphabetically.
- 15:17 Changeset [10570] by
- Improved/fixed the retrieval of times from Dim once again.
- 15:15 Changeset [10569] by
- Improved the retrieval of time-stamps once again from Dim; fixed the divider of the free space in the logger tab; replaced LP1/LP2 by LPint/LPext
- 15:13 Changeset [10568] by
- Some small fixes.
- 14:35 Changeset [10567] by
- 14:13 Changeset [10566] by
- 14:11 Changeset [10565] by
- rrunnumber defaul is 0x1234abcd ... to check if it is visible in the header at all trigger_id_reset pulse is prolonged, fron 20ns to 60ns.
- 13:53 Changeset [10564] by
- By mistake two {-brackets entered the svn -- removed.
- 13:50 Changeset [10563] by
- Removed the warning about linking the shared object to the executable.
- 13:50 Changeset [10562] by
- Updated.
- 13:48 Changeset [10561] by
- Added SET_TRIGEGR_INTERVAL, SET_TRIGGER_DELAY, SET__TIME_MARKER_DELAY, SET_DEAD_TIME.
- 13:47 Changeset [10560] by
- Changed the way the infoHandlers are called to make sure also the first call to the infoHandler is always catched.
- 13:45 Changeset [10559] by
- Added an error in case readline was not found
- 13:44 Changeset [10558] by
- Renamed kMaxInterval to kMaxTriggerInterval
- 13:40 Changeset [10557] by
- Implemented sending SET_TRIGGER_DELAY, SET_TRIGGER_INTERVAL, SET_DEAD_TIME and SET_TIME_MARKER_DELAY
- 10:22 Changeset [10556] by
- Proper display of the FTU states.
- 10:21 Changeset [10555] by
- Implemented ENABLE_FTU and TOGGLE_FTU
- 10:20 Changeset [10554] by
- Fixed a 64bit issue for DimFtuList::IsActive; added ToggleFTU
- 10:19 Changeset [10553] by
- Implemented the command to send when clicking on the FTU Leds
- 10:18 Changeset [10552] by
- Some design issues; made the FTU LEDs checkable
- 09:51 Changeset [10551] by
- Fixed some treatment of 64bit values.
- 09:50 Changeset [10550] by
- Added some comments about shared libraries.
- 08:49 Changeset [10549] by
- bug fix: wrong code when fits are opened
05/03/11:
- 20:53 Changeset [10548] by
- Implemented a status LED for the FTUs
- 20:53 Changeset [10547] by
- Implemented a status LED for the FTUs
- 19:31 Changeset [10546] by
- Disabled Dim padding to be able to properly receive reports; initialize time-stamp in infoHandler
- 19:28 Changeset [10545] by
- Added getter for a bool.
- 19:25 Changeset [10544] by
- Removed obsolete include of TQtTimer
- 19:25 Changeset [10543] by
- Added HeadersFTM.cc to fact.
- 18:28 Changeset [10542] by
- Added SetThreshold and CheckEventSize; some comment to remind me what work to do tomorrow.
- 18:27 Changeset [10541] by
- Added some helpful output to the arguments
- 18:26 Changeset [10540] by
- Send SetThreshold if a value is changed.
- 18:26 Changeset [10539] by
- Added references to Qt
- 18:25 Changeset [10538] by
- Added some more data to the FTU list.
- 18:25 Changeset [10537] by
- Encapsulated SQL support into ifdef.
- 18:23 Changeset [10536] by
- Updated the data logger widgets; added better handling of the FTM::DimError service.
- 18:22 Changeset [10535] by
- Added more details to Error.
- 18:19 Changeset [10534] by
- Added some code to get rid of the getcwd warning - we have to go through all warnings and errors again anyway; use the build in boolean for the commands
- 17:25 Changeset [10533] by
- added scheduler
- 17:22 Changeset [10532] by
- Removed the annoying warning about linking shared objects and executables.
- 17:21 Changeset [10531] by
- removed sched.cc as it was only for tests
- 17:20 Changeset [10530] by
- added program for scheduler
- 14:04 Changeset [10529] by
- Various bug fixes and new commands added
- 10:49 Changeset [10528] by
- Implemented Ping-button.
- 10:05 Changeset [10527] by
- Updated.
- 10:04 Changeset [10526] by
- Replaces output for HAS_ROOT_QT qith yes/no
- 10:03 Changeset [10525] by
- Added Number of responding boards and boards in crate to DimFtuList
- 10:02 Changeset [10524] by
- Encapsulated root stuff into ifdef's; removed the root update timer - it is not necessary if we don't allow user interaction; implemented more accurate colors for the FTU Leds
- 09:47 Changeset [10523] by
- Some additions about root.
05/02/11:
- 23:24 Changeset [10522] by
- Removed DimNetworkInfo; instead implemented proper initialization of the time-stamp in all infoHandlers
- 19:58 Changeset [10521] by
- Fixed chat led.
- 19:37 Changeset [10520] by
- 19:13 Changeset [10519] by
- Ensure Timestamp is correctly initialized.
- 19:12 Changeset [10518] by
- Added latest changes, which includes almost a complete FTM support and implements root-plots.
- 19:11 Changeset [10517] by
- Added first version (not documented at all) of the fake-ftm and the ftmctrl
- 19:10 Changeset [10516] by
- Updated.
- 19:10 Changeset [10515] by
- Some updates; tried to fix the deocumentation if's
- 19:07 Changeset [10514] by
- Ensure Timestamp is correctly initialized.
- 19:06 Changeset [10513] by
- Ensure Timestamp is correctly initialized.
- 19:06 Changeset [10512] by
- replace the address of the first element by the data() member function
- 19:05 Changeset [10511] by
- Added exit handler; call exit handler in case of fatal error; add Dim id to messages.
- 19:04 Changeset [10510] by
- Moved exit handler to DimErrorRedirecter.
- 19:03 Changeset [10509] by
- Ensure Timestamp is correctly initialized.
- 18:58 Changeset [10508] by
- Removed dependence on Tools::Format()
- 18:57 Changeset [10507] by
- 18:55 Changeset [10506] by
- 18:54 Changeset [10505] by
- 14:56 Changeset [10504] by
- supports new FAD event format: setting runnumber resetting internat trigger ID
- 10:19 Changeset [10503] by
- 10:11 Changeset [10502] by
- soft & hardware trigger getrennt
05/01/11:
- 14:04 Changeset [10501] by
- Added text about padding in Dim.
04/29/11:
- 14:55 Changeset [10500] by
- - FAD internal trigger ID reset is possible - with 0x"2A" - runnumber will be written into EVent header (32bit) default is zero.
- 13:53 Changeset [10499] by
- Small fixes
- 13:25 Changeset [10498] by
- Use stringstreams to replace Form not strings and +=
- 13:09 Changeset [10497] by
- Removed the last usage of Tools::Form.
- 13:06 Changeset [10496] by
- Removed usage of Tools::Form.
- 12:51 Changeset [10495] by
- Added server name to Event name.
- 12:50 Changeset [10494] by
- The new convention is to return always the server name in GetCommandList - removed the server name from the list.
- 12:47 Changeset [10493] by
- Allow server names to end with a slash.
- 12:47 Changeset [10492] by
- Return more info about statet which were not found in GetState.
- 12:46 Changeset [10491] by
- Added some comment.
- 11:52 Changeset [10490] by
- Fixed a severe bug in destructor deleting the fEventQueue elements, do not go to IsRunning() state in Run(dummy==true) mode.
- 10:19 Changeset [10489] by
- Added a number of subscriptions service and better error handling
- 09:48 Changeset [10488] by
- EXIT command was ignored when running in a shell - fixed.
04/28/11:
- 17:36 Changeset [10487] by
- Some cosmetics to output.
- 17:35 Changeset [10486] by
- Remove redundant trailing \0s from strings.
- 14:03 Changeset [10485] by
- Fixed a valgrind warning about mixing delete and free()
- 14:02 Changeset [10484] by
- Exchanged the order of the STATE and the STATE_LIST for logical reasons.
- 12:20 Changeset [10483] by
- Switched to new version.
- 12:20 Changeset [10482] by
- Removed old version.
- 12:17 Changeset [10481] by
- Used DimInfo by mistake instead of DimStampedInfo.
- 11:59 Changeset [10480] by
- New version V19r19 with some important bug fixes.
- 11:10 Changeset [10479] by
- Disable padding for all dim transfer.
- 11:08 Changeset [10478] by
- Updated - fixed a typo.
- 11:08 Changeset [10477] by
- Added descriptions for the service itself and for the default Dim services.
- 11:07 Changeset [10476] by
- Changed the services to described services.
- 11:06 Changeset [10475] by
- Changed the QTextDocument to be of a fixed size so that no horizontal scroll bars are needed.
04/27/11:
- 14:45 Changeset [10474] by
- Added more services + define for single run-fits or not
- 10:02 Changeset [10473] by
- Fixed compilation errors.
- 10:01 Changeset [10472] by
- Fixed compilation errors.
- 09:55 Changeset [10471] by
- Use a C-string as argument for path()
- 09:55 Changeset [10470] by
- Removed using error_code directly.
Note:
See TracTimeline
for information about the timeline view.
