source: firmware

Revision Log Mode:


Legend:

Added
Modified
Copied or renamed
Diff Rev Age Author Log Message
(edit) @11770   13 years neise removed bug in nc_format. wrongly used pointer to piinter nc_format_buffer.
(edit) @11757   13 years neise version 0x02.13: send data via socket 1 only. sockets 2..7 should be ...
(edit) @11756   13 years neise bitfiles are now versioned as well
(edit) @11755   13 years neise reinit of this svn repos .... it was all too messy deleted the old ...
(edit) @11696   13 years neise the changes we made with thomas B did not work. I have to find out ...
(edit) @11681   13 years neise removed minor typos
(edit) @11679   13 years weitzel
(edit) @11671   13 years tbretz Fixed a bug in nc_format - nc_format_buffer is already the pointer and ...
(edit) @11670   13 years tbretz Simplified writing into ring-buffer by using modulo operator.
(edit) @11669   13 years tbretz Fixed a possible dead lock in eth_write_*
(edit) @11668   13 years neise
(edit) @11667   13 years neise
(edit) @11666   13 years neise
(edit) @11660   13 years weitzel FTM status states newly defined
(edit) @11658   13 years weitzel
(edit) @11654   13 years weitzel two new status states introduced for FTM to indicate lock status of ...
(edit) @11653   13 years vogler clock cond interface with PLL lock seperate
(edit) @11652   13 years vogler ftm_definition for firmware v 4
(edit) @11648   13 years vogler clock cond interface, new settings loaded only when changed
(edit) @11541   13 years weitzel FTM IP changed
(edit) @11514   13 years weitzel FTM: changeover to firmware ID 3
(edit) @11513   13 years vogler lightpulser interface modified to reduce LED current and light output
(edit) @11485   13 years weitzel FTM firmware features now the config_single_FTU command (to be ...
(edit) @11241   13 years weitzel FTM: changes in library file: firmware ID increased to v2 and ...
(edit) @11212   13 years neise v0207 features DRS reset, but needs hardware mods. Do not use
(edit) @11206   13 years weitzel FTM network settings for La Palma added
(edit) @11173   13 years neise this is v0206 --- v0205 had a bug: when sending 'enable busy' ...
(edit) @11155   13 years neise v0205 changed ADC dataformat to unsigned short. - untested ... not ...
(edit) @11122   13 years neise Firmware version v0202 LEDs show: busy and w5300_reset DISCON after ...
(edit) @10989   13 years neise
(edit) @10988   13 years neise
(edit) @10970   13 years neise new version 0x0200
(edit) @10958   13 years neise
(edit) @10957   13 years neise
(edit) @10929   13 years weitzel FTM: patch in LP interface to correct for swapped channels; change in ...
(edit) @10915   13 years neise
(edit) @10914   13 years neise
(edit) @10911   13 years neise atmega thinks it receives 512 bytes all the time ... thats not true ...
(edit) @10910   13 years neise
(edit) @10908   13 years neise
(edit) @10902   13 years neise
(edit) @10901   13 years neise gui stuff
(edit) @10900   13 years neise it compiles but doenst work....
(edit) @10892   13 years neise
(edit) @10891   13 years neise completed w5300_interface implementation. needs testing now
(edit) @10890   13 years neise minor changes
(edit) @10889   13 years neise memory_manager_2.vhd is a hopefully simpler version of the original ...
(edit) @10888   13 years neise - not yet tested; not yet simulated - w5300_modul2.vhd implements the ...
(edit) @10886   13 years neise new try to oout source the W5300 read/write access in order to get ...
(edit) @10883   14 years neise one week of changes in zurich :-(
(edit) @10879   14 years weitzel FTM: new light pulser interface, new timing constraint in .ucf file
(edit) @10857   14 years vogler ftm definitions for Lightpulser Interface Basic (50MHz clock only) added
(edit) @10855   14 years vogler Lightpulser Basic version with 50MHz clock only added
(edit) @10847   14 years weitzel FTM LP corrections
(edit) @10812   14 years weitzel FTM doc directory cleaned up
(edit) @10803   14 years weitzel FTM: crate reset implemented
(edit) @10791   14 years vogler forgotten file sigle_LP.vhd added
(edit) @10788   14 years vogler Update: FTM statis data block: Lightpulser interface
(edit) @10787   14 years vogler Update: FTM statis data block: Lightpulser interface
(edit) @10779   14 years weitzel some changes in FTM Timing_counter
(edit) @10761   14 years vogler Lightpulser first version added
(edit) @10760   14 years weitzel FTM: reset of timing counters implemented
(edit) @10754   14 years neise
(edit) @10753   14 years neise working usb revision 10245 - modified for nice temperature printing ...
(edit) @10744   14 years neise
(edit) @10743   14 years neise
(edit) @10742   14 years vogler FTM Timing counters added
(edit) @10740   14 years weitzel several bugfixes for FTM firmware
(edit) @10738   14 years neise
(edit) @10729   14 years neise
(edit) @10724   14 years neise
(edit) @10706   14 years neise
(edit) @10705   14 years neise
(edit) @10698   14 years neise
(edit) @10697   14 years neise
(edit) @10677   14 years neise
(edit) @10674   14 years neise ethernet with user interface test
(edit) @10668   14 years neise
(edit) @10667   14 years neise
(edit) @10639   14 years weitzel FTM: keep-alive of Wiznet actiated, clock conditioner interface ...
(edit) @10588   14 years neise added MSR Firmware MSR is the little brother of FSC
(edit) @10567   14 years neise
(edit) @10566   14 years neise
(edit) @10565   14 years neise rrunnumber defaul is 0x1234abcd ... to check if it is visible in the ...
(edit) @10503   14 years neise
(edit) @10502   14 years neise soft & hardware trigger getrennt
(edit) @10500   14 years neise - FAD internal trigger ID reset is possible - with 0x"2A" - runnumber ...
(edit) @10462   14 years neise ADC data is not send in network byte order anymore. RS485 receiver is ...
(edit) @10448   14 years weitzel new FTM docu
(edit) @10441   14 years weitzel new FTM firmware featuring e.g. start/stop run commands and new header
(edit) @10440   14 years weitzel new version of FTM docu
(edit) @10418   14 years weitzel New FTM firmare: dna, fad_broadcast, FTU error messages, rates readout
(edit) @10366   14 years weitzel FTM trigger manager from MCSE added; DCM arrangement changed; changes ...
(edit) @10328   14 years weitzel changes in FTM firmware to debug rates readout, clock conditioner added
(edit) @10260   14 years vogler ftm_definitions clock constants and array for conditioner interface updated
(edit) @10259   14 years vogler ftm_definitions update constants for clock conditioner interface introduced
(edit) @10258   14 years vogler ftm_definitions update clk_cond_array_type
(edit) @10257   14 years vogler ftm_definitions update clk_cond_array_type
(edit) @10256   14 years weitzel new version of FTM ethernet module; first version of clock conditioner
(edit) @10250   14 years vogler Clock_cond_interface updated: PLL lock disconnected
Note: See TracRevisionLog for help on using the revision log.